AMI UCEP214 Pillow Block Bearings
With over 10170 full-service stores, our AMI UCEP214 Pillow Block Bearings inventory BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. is extensive and our parts are priced right. within 24 hours. 4.594 Inch | 116.7 M Bolt Spacing This helps you maximize your productivity by saving time and your hard-earned dollars.
What is UCEP214 bearing cross reference？
| Brand Name: | AMI |
| Model Number: | UCEP214 |
| Controlled Flow Rate: | 45.0 LB |
| Manufacturer Part No.: | Flange Mount |
| Spline Description: | Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End: | 2520VQ17A12-1CC20LH |
| Relief Valve Setting: | 2 1/2 |
| Cover End Flow @ RPM: | Flange |
| Minor Diameter: | 3/16 in |
| GPM @ 1,800 rpm, Shaft End: | Standard Pilot |
Product Details
| Controlled Flow Rate | 45.0 LB |
| Manufacturer Part No. | Flange Mount |
| Spline Description | Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End | 2520VQ17A12-1CC20LH |
| Relief Valve Setting | 2 1/2 |
| Cover End Flow @ RPM | Flange |
| Minor Diameter | 3/16 in |
| GPM @ 1,800 rpm, Shaft End | Standard Pilot |
| Cover End RPM [Max | 0.875 in |
| Max. RPM [Max | Straight w/ Key |
| Seal Material | 2520VQ |
| Pressure Port Size, Shaft End | 1 15/16 in |
| Pressure Port Size, Cover End | Buna-N |
| Cover End Pressure [Max | 2500 |
| Port Orientation - Shaft End | N/A |
| Port Size | SAE B, 2 Bolt |
| Shaft Type | Single Shaft Seal |
| Mounting | N/A |
| Shaft End Flow @ RPM | 2700 |
| Major Diameter [Min | 2500 |
| Mounting Flange | N/A |
| Pump Series | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Length | N/A |
| Shaft End Pressure [Max | N/A |
| Major Diameter [Max | N/A |
| Port Type | N/A |
| Shaft Seal Type | N/A |
| Displacement Shaft End (cu in/revolution) | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End | 2520VQ17A12-1CC20LH |
| Shaft Dia. | 2300 |
| Shaft End RPM [Max | 3000 |
| Rotation | 18 |
| Minor Diameter [Min | 25.5 |
| Pilot Type | w/o Integral Valves |
| Weight | Outlet 45° CW from Inlet |
| Integral Valve Configuration | Outlet Inline w/Inlet |
| Minor Diameter [Max | 3/4 in Flange |
| Displacement Cover End (cu in/revolution) | 1 in Flange |
| Shaft Key | 2.41 |
| Model No. | 3.37 |
