AMI UCF211-35NP Flange Block Bearings
YOU’LL FIND BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. AN Needle Non Thrust Ro Category Inch Inch - Metric EXTENSIVE SELECTION OF AMI UCF211-35NP Flange Block Bearings FOR SALE.
What is UCF211-35NP bearing interchange？
| Brand Name: | AMI |
| Model Number: | UCF211-35NP |
| Controlled Flow Rate: | 35.0 LB |
| Shaft End Flow @ RPM: | Flange Mount |
| Mounting: | Left Hand (CCW) |
| Shaft Seal Type: | V2020-1F11S8S-11CB30-LH |
| Max. RPM [Max: | 2 |
| Shaft Dia.: | Flange |
| Cover End Flow @ RPM: | N/A |
| Shaft Type: | N/A |
Product Details
| Controlled Flow Rate | 35.0 LB |
| Shaft End Flow @ RPM | Flange Mount |
| Mounting | Left Hand (CCW) |
| Shaft Seal Type | V2020-1F11S8S-11CB30-LH |
| Max. RPM [Max | 2 |
| Shaft Dia. | Flange |
| Cover End Flow @ RPM | N/A |
| Shaft Type | N/A |
| Port Orientation - Shaft End | 0.875 in |
| Shaft Key | 13 Tooth Splined |
| Spline Description | V2020 |
| Shaft End Pressure [Max | 1 5/16 in |
| Model No. | Buna-N |
| Shaft End RPM [Max | 2500 |
| Cover End RPM [Max | 0.728 in |
| Port Orientation - Cover End | SAE B, 2 Bolt |
| Relief Valve Setting | Single Shaft Seal |
| Integral Valve Configuration | 16/32 |
| Major Diameter [Max | 2800 |
| Shaft Length | 2500 |
| Cover End Pressure [Max | N/A |
| Pump Series | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 0.873 in |
| Displacement Shaft End (cu in/revolution) | 0.872 in |
| Mounting Flange | 0.7335 in |
| Rotation | 0.7225 in |
| Major Diameter [Min | N/A |
| Pressure Port Size, Shaft End | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | V2020-1F11S8S-11CB30-LH |
| Manufacturer Part No. | 2500 |
| Port Type | 2500 |
| Minor Diameter [Min | 12 |
| Pressure Port Size, Cover End | 16.5 |
| Minor Diameter | N/A |
| GPM @ 1,800 rpm, Shaft End | Outlet 90° CCW from Inlet |
| Minor Diameter [Max | Outlet Inline w/Inlet |
| Port Size | 3/4 in SAE O-Ring |
| Weight | 3/4 in SAE O-Ring |
| Pilot Type | 1.62 |
| Seal Material | 2.22 |
