AMI UCFB204-12C4HR23 Flange Block Bearings
With over 10170 full-service Open Enclosure stores, BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. our AMI UCFB204-12C4HR23 Flange Block Bearings inventory is extensive and our parts are priced right. within 24 CONSOLIDATED BEARING Brand hours. This helps you maximize your productivity by saving time 1.67 Weight / LBS and your hard-earned dollars.
What is UCFB204-12C4HR23 bearing interchange？
| Brand Name: | AMI |
| Model Number: | UCFB204-12C4HR23 |
| Shaft Type: | 76.0 LB |
| Shaft Key: | Flange Mount |
| Manufacturer Part No.: | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: | 3525VQ25A21-11CC20 |
| Weight: | 3 |
| Spline Description: | Flange |
| Port Orientation - Cover End: | N/A |
| Pump Series: | Standard Pilot |
Product Details
| Shaft Type | 76.0 LB |
| Shaft Key | Flange Mount |
| Manufacturer Part No. | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End | 3525VQ25A21-11CC20 |
| Weight | 3 |
| Spline Description | Flange |
| Port Orientation - Cover End | N/A |
| Pump Series | Standard Pilot |
| Minor Diameter [Max | 1.25 in |
| Shaft Dia. | 14 Tooth Splined |
| Port Size | 3525VQ |
| Major Diameter [Max | 1.9375 in |
| Pressure Port Size, Cover End | Buna-N |
| Cover End RPM [Max | 2500 |
| Max. RPM [Max | 1.04 in |
| Shaft Length | SAE C, 2 Bolt |
| Minor Diameter [Min | Single Shaft Seal |
| Model No. | 12/24 |
| Mounting | 2500 |
| Cover End Flow @ RPM | 2500 |
| Shaft End RPM [Max | N/A |
| Relief Valve Setting | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 1.248 in |
| Integral Valve Configuration | 1.247 in |
| Major Diameter [Min | N/A |
| Shaft Seal Type | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Port Type | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Controlled Flow Rate | 3525VQ25A21-11CC20 |
| Port Orientation - Shaft End | 3000 |
| Minor Diameter | 3000 |
| Seal Material | 31.5 |
| Displacement Shaft End (cu in/revolution) | 37.5 |
| Mounting Flange | w/o Integral Valves |
| Cover End Pressure [Max | Outlet 45° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End | Outlet Inline w/Inlet |
| Shaft End Pressure [Max | 1 in Flange |
| Rotation | 1 1/4 in Flange |
| Pilot Type | 4.12 |
| Shaft End Flow @ RPM | 4.98 |
