AMI CUCF210-30CE Flange Block Bearings
Various BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. AMI Bearing types GARLOCK BEARINGS GGB Brand and sizes to accommodate your 0.472 Inch | 12 Mill Nominal Bore AMI CUCF210-30CE Flange Block Bearings Steel Backed Composi Material requirements.
What is CUCF210-30CE bearing interchange？
| Brand Name: |
AMI |
| Model Number: |
CUCF210-30CE |
| Port Orientation - Cover End: |
45.0 LB |
| Shaft Dia.: |
Flange Mount |
| Manufacturer Part No.: |
Left Hand (CCW) |
| Cover End Flow @ RPM: |
2520V21A5-1BD22L |
| GPM @ 1,800 rpm, Shaft End: |
2 1/2 |
| Integral Valve Configuration: |
Flange |
| Minor Diameter [Min: |
1/4 in |
| Weight: |
Standard Pilot |
Product Details
| Port Orientation - Cover End |
45.0 LB |
| Shaft Dia. |
Flange Mount |
| Manufacturer Part No. |
Left Hand (CCW) |
| Cover End Flow @ RPM |
2520V21A5-1BD22L |
| GPM @ 1,800 rpm, Shaft End |
2 1/2 |
| Integral Valve Configuration |
Flange |
| Minor Diameter [Min |
1/4 in |
| Weight |
Standard Pilot |
| Shaft Type |
0.875 in |
| Major Diameter [Min |
Straight w/ Key |
| Major Diameter [Max |
2520V |
| GPM @ 1,800 rpm, Cover End |
2.32 in |
| Displacement Shaft End (cu in/revolution) |
Buna-N |
| Pressure Port Size, Shaft End |
1800 |
| Model No. |
N/A |
| Cover End Pressure [Max |
SAE B, 2 Bolt |
| Shaft End RPM [Max |
Single Shaft Seal |
| Shaft End Flow @ RPM |
N/A |
| Displacement Cover End (cu in/revolution) |
1800 |
| Shaft Seal Type |
1800 |
| Pilot Type |
N/A |
| Max. RPM [Max |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft Length |
N/A |
| Minor Diameter |
N/A |
| Relief Valve Setting |
N/A |
| Port Orientation - Shaft End |
N/A |
| Shaft End Pressure [Max |
N/A |
| Mounting Flange |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Rotation |
2520V21A5-1BD22L |
| Shaft Key |
3000 |
| Seal Material |
2500 |
| Pressure Port Size, Cover End |
7.5 |
| Pump Series |
31.5 |
| Controlled Flow Rate |
N/A |
| Port Size |
Outlet 135° CW from Inlet |
| Mounting |
Outlet 90° CCW from Inlet |
| Port Type |
3/4 in Code 61 |
| Cover End RPM [Max |
1 in Code 61 |
| Minor Diameter [Max |
1.1 |
| Spline Description |
4.1 |