AMI UCF211-35NP Flange Block Bearings
YOU’LL FIND BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. AN Needle Non Thrust Ro Category Inch Inch - Metric EXTENSIVE SELECTION OF AMI UCF211-35NP Flange Block Bearings FOR SALE.
What is UCF211-35NP bearing interchange？
| Brand Name: |
AMI |
| Model Number: |
UCF211-35NP |
| Controlled Flow Rate: |
35.0 LB |
| Shaft End Flow @ RPM: |
Flange Mount |
| Mounting: |
Left Hand (CCW) |
| Shaft Seal Type: |
V2020-1F11S8S-11CB30-LH |
| Max. RPM [Max: |
2 |
| Shaft Dia.: |
Flange |
| Cover End Flow @ RPM: |
N/A |
| Shaft Type: |
N/A |
Product Details
| Controlled Flow Rate |
35.0 LB |
| Shaft End Flow @ RPM |
Flange Mount |
| Mounting |
Left Hand (CCW) |
| Shaft Seal Type |
V2020-1F11S8S-11CB30-LH |
| Max. RPM [Max |
2 |
| Shaft Dia. |
Flange |
| Cover End Flow @ RPM |
N/A |
| Shaft Type |
N/A |
| Port Orientation - Shaft End |
0.875 in |
| Shaft Key |
13 Tooth Splined |
| Spline Description |
V2020 |
| Shaft End Pressure [Max |
1 5/16 in |
| Model No. |
Buna-N |
| Shaft End RPM [Max |
2500 |
| Cover End RPM [Max |
0.728 in |
| Port Orientation - Cover End |
SAE B, 2 Bolt |
| Relief Valve Setting |
Single Shaft Seal |
| Integral Valve Configuration |
16/32 |
| Major Diameter [Max |
2800 |
| Shaft Length |
2500 |
| Cover End Pressure [Max |
N/A |
| Pump Series |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
0.873 in |
| Displacement Shaft End (cu in/revolution) |
0.872 in |
| Mounting Flange |
0.7335 in |
| Rotation |
0.7225 in |
| Major Diameter [Min |
N/A |
| Pressure Port Size, Shaft End |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
V2020-1F11S8S-11CB30-LH |
| Manufacturer Part No. |
2500 |
| Port Type |
2500 |
| Minor Diameter [Min |
12 |
| Pressure Port Size, Cover End |
16.5 |
| Minor Diameter |
N/A |
| GPM @ 1,800 rpm, Shaft End |
Outlet 90° CCW from Inlet |
| Minor Diameter [Max |
Outlet Inline w/Inlet |
| Port Size |
3/4 in SAE O-Ring |
| Weight |
3/4 in SAE O-Ring |
| Pilot Type |
1.62 |
| Seal Material |
2.22 |