0.669 Inch | 17 Millimeter x 0.866 Inch | 22 Millimeter x 0.709 Inch | 18 Millimeter CONSOLIDATED BEARING IR-17 X 22 X 18 Needle Non Thrust Roller Bearings
With over 0.669 Inch | 17 Millimeter x 0.866 Inch | 22 Millimeter x 0.709 Inch | 18 Millimeter 10170 full-service stores, 1.1965 in cone width: our 0.669 Inch | 17 Millimeter x 0.866 Inch | 22 Millimeter x 0.709 Inch | 18 Millimeter CONSOLIDATED BEARING IR-17 X 22 X 18 Needle Non Thrust Roller Bearings inventory is extensive and our parts 3300 series: are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. dollars.
What is IR-17 X 22 X 18 bearing interchange？
| Brand Name: |
CONSOLIDATED BEARING |
| Model Number: |
IR-17 X 22 X 18 |
| Relief Valve Setting: |
15.0 LB |
| Pump Series: |
Flange Mount |
| Port Orientation - Cover End: |
Right Hand (CW) |
| Shaft Seal Type: |
6 gal/min @ 1200 rpm |
| Pilot Type: |
1 |
| Weight: |
NPT |
| Port Type: |
N/A |
| Minor Diameter [Max: |
20 |
Product Details
| Relief Valve Setting |
15.0 LB |
| Pump Series |
Flange Mount |
| Port Orientation - Cover End |
Right Hand (CW) |
| Shaft Seal Type |
6 gal/min @ 1200 rpm |
| Pilot Type |
1 |
| Weight |
NPT |
| Port Type |
N/A |
| Minor Diameter [Max |
20 |
| Mounting Flange |
6 gpm @ 1200 rpm |
| Shaft End Flow @ RPM |
0.73 in |
| Cover End Pressure [Max |
11 Tooth Splined |
| Minor Diameter [Min |
9 / 1750 |
| Cover End Flow @ RPM |
V10 |
| Port Size |
1.25 in |
| Displacement Cover End (cu in/revolution) |
1/2 in NPT |
| Shaft End RPM [Max |
Buna-N |
| Mounting |
3000 |
| Controlled Flow Rate |
2200 psi |
| Cover End RPM [Max |
9 |
| Shaft Key |
P |
| Shaft End Pressure [Max |
SAE A, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End |
P |
| Rotation |
1 |
| Max. RPM [Max |
Inline w/ Inlet |
| Manufacturer Part No. |
1.2 |
| Spline Description |
4 gal/min |
| Minor Diameter |
Flow Control & Relief |
| Shaft Type |
2000 psi |
| GPM @ 1,800 rpm, Cover End |
38C |