DODGE EF4B-IP-108LE Flange Block Bearings
DODGE Bearing are a few brands 8.3 mm b you will find BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. in our inventory. Find DODGE EF4B-IP-108LE Flange Block Bearings to see what's in stock!
What is EF4B-IP-108LE bearing cross reference?
Brand Name: |
DODGE |
Model Number: |
EF4B-IP-108LE |
Shaft Seal Type: |
118.0 LB |
Displacement Cover End (cu in/revolution): |
Flange Mount |
Major Diameter [Max: |
Left Hand (CCW) |
Spline Description: |
4535VQ60A38-11AA20-LH |
Weight: |
4 |
Pressure Port Size, Shaft End: |
Flange |
Mounting Flange: |
N/A |
GPM @ 1,800 rpm, Cover End: |
Standard Pilot |
Product Details
Shaft Seal Type |
118.0 LB |
Displacement Cover End (cu in/revolution) |
Flange Mount |
Major Diameter [Max |
Left Hand (CCW) |
Spline Description |
4535VQ60A38-11AA20-LH |
Weight |
4 |
Pressure Port Size, Shaft End |
Flange |
Mounting Flange |
N/A |
GPM @ 1,800 rpm, Cover End |
Standard Pilot |
Cover End Flow @ RPM |
1.25 in |
Minor Diameter [Min |
14 Tooth Splined |
Pressure Port Size, Cover End |
4535VQ |
Minor Diameter |
1 15/16 in |
Manufacturer Part No. |
Double |
Controlled Flow Rate |
Buna-N |
Relief Valve Setting |
2200 |
Port Size |
1.04 in |
Port Orientation - Cover End |
SAE C, 2 Bolt |
Shaft Type |
Single Shaft Seal |
Seal Material |
12/24 |
Integral Valve Configuration |
2200 |
Shaft Length |
2200 |
Shaft Dia. |
N/A |
Major Diameter [Min |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Shaft End Pressure [Max |
1.248 in |
Max. RPM [Max |
1.247 in |
Model No. |
N/A |
Minor Diameter [Max |
N/A |
Displacement Shaft End (cu in/revolution) |
11.8 |
Cover End Pressure [Max |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
Rotation |
4535VQ60A38-11AA20-LH |
Port Type |
3000 |
Cover End RPM [Max |
2500 |
Shaft Key |
57 |
Shaft End RPM [Max |
90 |
GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |
Pilot Type |
Outlet Opposite Inlet |
Shaft End Flow @ RPM |
Outlet Opposite Inlet |
Mounting |
1 1/4 in Flange |
Pump Series |
1 1/2 in Flange |
Port Orientation - Shaft End |
7.4 |