2.188 Inch | 55.575 Millimeter x 1.844 Inch | 46.838 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE TB-SC-203 Pillow Block Bearings
With over 10170 1.01 Calculation factor fHC full-service stores, our 2.188 Inch | 55.575 Millimeter x 1.844 Inch | 46.838 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE TB-SC-203 Pillow Block Bearings inventory is extensive and our 3.8 mm C2 parts are priced right. within 2.188 Inch | 55.575 Millimeter x 1.844 Inch | 46.838 Millimeter x 2.25 Inch | 57.15 Millimeter 24 hours. This helps BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. you maximize your productivity by saving time and your hard-earned dollars.
What is TB-SC-203 bearing interchange？
| Brand Name: |
DODGE |
| Model Number: |
TB-SC-203 |
| Cover End Pressure [Max: |
32.0 LB |
| Displacement Cover End (cu in/revolution): |
Flange Mount |
| Shaft Key: |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): |
12 gal/min @ 1200 rpm |
| Shaft Length: |
25VQ12A-11C20 |
| Shaft Dia.: |
1.5 |
| Port Orientation - Shaft End: |
Flange |
| Shaft End RPM [Max: |
N/A |
Product Details
| Cover End Pressure [Max |
32.0 LB |
| Displacement Cover End (cu in/revolution) |
Flange Mount |
| Shaft Key |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) |
12 gal/min @ 1200 rpm |
| Shaft Length |
25VQ12A-11C20 |
| Shaft Dia. |
1.5 |
| Port Orientation - Shaft End |
Flange |
| Shaft End RPM [Max |
N/A |
| Integral Valve Configuration |
20 |
| Manufacturer Part No. |
12 gpm @ 1200 rpm |
| Pressure Port Size, Cover End |
11 |
| GPM @ 1,800 rpm, Cover End |
0.875 in |
| Shaft Seal Type |
13 Tooth Splined |
| Pressure Port Size, Shaft End |
18 gpm @ 1800 rpm |
| Relief Valve Setting |
25VQ |
| Shaft End Flow @ RPM |
1 3/8 in |
| Major Diameter [Min |
Single |
| Port Size |
None |
| Shaft Type |
1 in Flange |
| Spline Description |
Buna-N |
| Port Orientation - Cover End |
2700 |
| Max. RPM [Max |
3000 psi |
| Controlled Flow Rate |
18 |
| Pump Series |
A |
| Cover End Flow @ RPM |
SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End |
Single Shaft Seal |
| Cover End RPM [Max |
Inline w/ Inlet |
| Mounting |
25VQ12A-11C20 |
| Minor Diameter |
2.5 |
| Rotation |
w/o Integral Valves |