LINK BELT F3U212NC Flange Block Bearings
QuestionLINK BELT F3U212NC Flange Block Bearings 1045 Carbon Steel Housing Material ? Find what you need BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. faster Yes (with retaining Bearing Retained by entering your LINK BELT information 15 Width T(mm) .
What is F3U212NC bearing interchange？
| Brand Name: |
LINK BELT |
| Model Number: |
F3U212NC |
| Shaft End Flow @ RPM: |
118.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Shaft Dia.: |
Left Hand (CCW) |
| Mounting: |
4535VQ60A38-11AA20-LH |
| Pressure Port Size, Cover End: |
4 |
| Cover End RPM [Max: |
Flange |
| Shaft Seal Type: |
N/A |
| Manufacturer Part No.: |
Standard Pilot |
Product Details
| Shaft End Flow @ RPM |
118.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Shaft Dia. |
Left Hand (CCW) |
| Mounting |
4535VQ60A38-11AA20-LH |
| Pressure Port Size, Cover End |
4 |
| Cover End RPM [Max |
Flange |
| Shaft Seal Type |
N/A |
| Manufacturer Part No. |
Standard Pilot |
| Integral Valve Configuration |
1.25 in |
| Pump Series |
14 Tooth Splined |
| Minor Diameter [Max |
4535VQ |
| Cover End Pressure [Max |
1 15/16 in |
| Seal Material |
Double |
| Spline Description |
Buna-N |
| Pilot Type |
2200 |
| Controlled Flow Rate |
1.04 in |
| Weight |
SAE C, 2 Bolt |
| Major Diameter [Min |
Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End |
12/24 |
| Cover End Flow @ RPM |
2200 |
| Port Size |
2200 |
| Shaft End RPM [Max |
N/A |
| Max. RPM [Max |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
11.8 |
| GPM @ 1,800 rpm, Shaft End |
1.247 in |
| Shaft Length |
N/A |
| Rotation |
N/A |
| Minor Diameter [Min |
N/A |
| Major Diameter [Max |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Model No. |
4535VQ60A38-11AA20-LH |
| Port Orientation - Shaft End |
3000 |
| Port Orientation - Cover End |
2500 |
| Mounting Flange |
57 |
| Minor Diameter |
90 |
| Relief Valve Setting |
w/o Integral Valves |
| Port Type |
Outlet Opposite Inlet |
| Pressure Port Size, Shaft End |
Outlet Opposite Inlet |
| Shaft Type |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
1 1/2 in Flange |
| Shaft Key |
7.4 |