LINK BELT T3S223E Take Up Unit Bearings
LINK BELT T3S223E Take Up Unit Bearings Product Brochures , Nitrile Seal BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. LINK BELT Bearing Steel Rolling Element Material Manufacturing Service . Get Your Free.
What is T3S223E bearing interchange？
| Brand Name: |
LINK BELT |
| Model Number: |
T3S223E |
| Displacement Shaft End (cu in/revolution): |
76.0 LB |
| Shaft Length: |
Flange Mount |
| Mounting Flange: |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End: |
3525VQ38A21-11AB20-LH |
| Port Orientation - Cover End: |
3 |
| Shaft Seal Type: |
Flange |
| Relief Valve Setting: |
N/A |
| Integral Valve Configuration: |
Standard Pilot |
Product Details
| Displacement Shaft End (cu in/revolution) |
76.0 LB |
| Shaft Length |
Flange Mount |
| Mounting Flange |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End |
3525VQ38A21-11AB20-LH |
| Port Orientation - Cover End |
3 |
| Shaft Seal Type |
Flange |
| Relief Valve Setting |
N/A |
| Integral Valve Configuration |
Standard Pilot |
| Pump Series |
1.25 in |
| Weight |
14 Tooth Splined |
| Shaft Key |
3525VQ |
| Pilot Type |
1.9375 in |
| Shaft End RPM [Max |
Buna-N |
| Displacement Cover End (cu in/revolution) |
2400 |
| Manufacturer Part No. |
1.04 in |
| Mounting |
SAE C, 2 Bolt |
| Cover End Flow @ RPM |
Single Shaft Seal |
| Spline Description |
12/24 |
| Port Size |
2500 |
| Pressure Port Size, Cover End |
2400 |
| Cover End Pressure [Max |
N/A |
| GPM @ 1,800 rpm, Shaft End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
1.248 in |
| Max. RPM [Max |
1.247 in |
| Major Diameter [Min |
N/A |
| Shaft Type |
N/A |
| Minor Diameter [Min |
N/A |
| Port Orientation - Shaft End |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Minor Diameter [Max |
3525VQ38A21-11AB20-LH |
| Cover End RPM [Max |
3000 |
| Port Type |
3000 |
| Shaft Dia. |
31.5 |
| Pressure Port Size, Shaft End |
57 |
| Model No. |
w/o Integral Valves |
| Rotation |
Outlet 45° CCW from Inlet |
| Seal Material |
Outlet Opposite Inlet |
| Controlled Flow Rate |
1 in Flange |
| Shaft End Pressure [Max |
1 1/4 in Flange |
| Major Diameter [Max |
4.12 |
| Minor Diameter |
7.42 |