NTN 6208LUNR Single Row Ball Bearings
What is the 2.00 mm Fillet Radius ra best BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. place to buy NTN 6208LUNR Single Row Ball Bearings 168000 N Basic Dynamic Radial Load Rating C online? NTN Bearing 260.0000 mm D Manufacturing Service .
What is 6208LUNR bearing cross reference？
| Brand Name: |
NTN |
| Model Number: |
6208LUNR |
| Model No.: |
45.0 LB |
| Cover End RPM [Max: |
Flange Mount |
| Mounting: |
Left Hand (CCW) |
| Seal Material: |
2520VQ12A5-11CC20LH |
| Displacement Cover End (cu in/revolution): |
2.5 |
| Pressure Port Size, Cover End: |
Flange |
| Max. RPM [Max: |
N/A |
| Shaft Type: |
Standard Pilot |
Product Details
| Model No. |
45.0 LB |
| Cover End RPM [Max |
Flange Mount |
| Mounting |
Left Hand (CCW) |
| Seal Material |
2520VQ12A5-11CC20LH |
| Displacement Cover End (cu in/revolution) |
2.5 |
| Pressure Port Size, Cover End |
Flange |
| Max. RPM [Max |
N/A |
| Shaft Type |
Standard Pilot |
| Mounting Flange |
0.875 in |
| Shaft Dia. |
13 Tooth Splined |
| Minor Diameter [Min |
2520VQ |
| Relief Valve Setting |
1 3/8 in |
| Major Diameter [Min |
Double |
| Cover End Flow @ RPM |
Buna-N |
| Major Diameter [Max |
2700 |
| Port Orientation - Shaft End |
0.715 in |
| GPM @ 1,800 rpm, Shaft End |
SAE B, 2 Bolt |
| Cover End Pressure [Max |
Single Shaft Seal |
| Shaft End Flow @ RPM |
16/32 |
| Minor Diameter |
2700 |
| Rotation |
2700 |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Shaft Key |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Type |
0.873 in |
| Integral Valve Configuration |
0.872 in |
| Shaft Seal Type |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Port Orientation - Cover End |
N/A |
| Pump Series |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Controlled Flow Rate |
2520VQ12A5-11CC20LH |
| Minor Diameter [Max |
3000 |
| Weight |
3000 |
| Manufacturer Part No. |
7.5 |
| Pilot Type |
18 |
| Shaft End RPM [Max |
w/o Integral Valves |
| Shaft Length |
Outlet 45° CW from Inlet |
| Port Size |
Outlet Inline w/Inlet |
| Shaft End Pressure [Max |
3/4 in Flange |
| Spline Description |
1 in Flange |
| Displacement Shaft End (cu in/revolution) |
2.5 |