NTN 6904LLBCS24V20 Single Row Ball Bearings
With over 10170 full-service BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. stores, our NTN 6904LLBCS24V20 Single Row Ball Bearings inventory is extensive and our parts are priced right. within 24 120.0000 mm D hours. This 6000 rpm Oil Speed Rating n2 helps 63700 N Basic Dynamic Radial Load Rating C you maximize your productivity by saving time and your hard-earned dollars.
What is 6904LLBCS24V20 bearing cross reference?
Brand Name: |
NTN |
Model Number: |
6904LLBCS24V20 |
Cover End Flow @ RPM: |
30.0 LB |
Spline Description: |
Flange Mount |
Shaft Length: |
Right Hand (CW) |
Pressure Port Size, Cover End: |
V2010-1F7S5S-11AA12 |
Pressure Port Size, Shaft End: |
1 1/2 |
Pilot Type: |
Flange |
Integral Valve Configuration: |
N/A |
Port Size: |
N/A |
Product Details
Cover End Flow @ RPM |
30.0 LB |
Spline Description |
Flange Mount |
Shaft Length |
Right Hand (CW) |
Pressure Port Size, Cover End |
V2010-1F7S5S-11AA12 |
Pressure Port Size, Shaft End |
1 1/2 |
Pilot Type |
Flange |
Integral Valve Configuration |
N/A |
Port Size |
N/A |
Pump Series |
0.875 in |
Port Orientation - Shaft End |
13 Tooth Splined |
GPM @ 1,800 rpm, Shaft End |
V2010 |
Shaft End Pressure [Max |
1 5/16 in |
Seal Material |
Buna-N |
Displacement Shaft End (cu in/revolution) |
3000 |
Max. RPM [Max |
0.728 in |
Controlled Flow Rate |
SAE B, 2 Bolt |
Shaft Type |
Single Shaft Seal |
Relief Valve Setting |
16/32 |
Shaft End RPM [Max |
3000 |
Minor Diameter [Min |
3000 |
Mounting |
N/A |
Model No. |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Shaft Seal Type |
0.873 in |
GPM @ 1,800 rpm, Cover End |
0.872 in |
Port Type |
0.7335 in |
Minor Diameter |
0.7225 in |
Shaft End Flow @ RPM |
N/A |
Cover End RPM [Max |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
Shaft Key |
V2010-1F7S5S-11AA12 |
Mounting Flange |
2500 |
Rotation |
2500 |
Cover End Pressure [Max |
7.5 |
Weight |
10.5 |
Port Orientation - Cover End |
N/A |
Shaft Dia. |
Outlet 135° CCW from Inlet |
Minor Diameter [Max |
Outlet Opposite Inlet |
Major Diameter [Min |
1/2 in SAE O-Ring |
Major Diameter [Max |
3/4 in SAE O-Ring |
Manufacturer Part No. |
1 |
Displacement Cover End (cu in/revolution) |
1.39 |