1.575 Inch | 40 Millimeter x 4.125 Inch | 104.77 Millimeter x 1.347 Inch | 34.21 Millimeter NTN CGM1209PPE Cylindrical Roller Bearings
1.575 Inch | 40 Millimeter x 4.125 Inch | 104.77 Millimeter x 1.347 Inch | 34.21 Millimeter NTN CGM1209PPE Cylindrical Roller Bearings 15000 rpm Grease Speed Rating n1 Manufacturers , Online BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. Wholesale 1.575 Inch | 40 Millimeter x 4.125 Inch | 104.77 Millimeter x 1.347 Inch | 34.21 Millimeter Suppliers 12.000 mm d !
What is CGM1209PPE bearing cross reference？
| Brand Name: |
NTN |
| Model Number: |
CGM1209PPE |
| Cover End Flow @ RPM: |
30.0 LB |
| GPM @ 1,800 rpm, Cover End: |
Flange Mount |
| Shaft End Pressure [Max: |
Right Hand (CW) |
| Shaft Length: |
V2010-1F9S5S-1DD12 |
| Controlled Flow Rate: |
1 1/2 |
| Port Type: |
Flange |
| Displacement Cover End (cu in/revolution): |
3/16 in |
| Model No.: |
N/A |
Product Details
| Cover End Flow @ RPM |
30.0 LB |
| GPM @ 1,800 rpm, Cover End |
Flange Mount |
| Shaft End Pressure [Max |
Right Hand (CW) |
| Shaft Length |
V2010-1F9S5S-1DD12 |
| Controlled Flow Rate |
1 1/2 |
| Port Type |
Flange |
| Displacement Cover End (cu in/revolution) |
3/16 in |
| Model No. |
N/A |
| Weight |
0.875 in |
| Port Orientation - Shaft End |
Straight w/ Key |
| GPM @ 1,800 rpm, Shaft End |
V2010 |
| Pump Series |
2.3125 in |
| Rotation |
Buna-N |
| Pressure Port Size, Cover End |
2800 |
| Major Diameter [Max |
N/A |
| Manufacturer Part No. |
SAE B, 2 Bolt |
| Cover End RPM [Max |
Single Shaft Seal |
| Minor Diameter [Max |
N/A |
| Port Orientation - Cover End |
3000 |
| Minor Diameter [Min |
2800 |
| Shaft Key |
N/A |
| Shaft End Flow @ RPM |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Pilot Type |
N/A |
| Relief Valve Setting |
N/A |
| Port Size |
N/A |
| Shaft Dia. |
N/A |
| Major Diameter [Min |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Mounting Flange |
V2010-1F9S5S-1DD12 |
| Mounting |
2500 |
| Shaft End RPM [Max |
2500 |
| Seal Material |
7.5 |
| Cover End Pressure [Max |
13.5 |
| Shaft Seal Type |
N/A |
| Spline Description |
Outlet 135° CW from Inlet |
| Minor Diameter |
Outlet 90° CW from Inlet |
| Integral Valve Configuration |
1/2 in SAE O-Ring |
| Shaft Type |
3/4 in SAE O-Ring |
| Pressure Port Size, Shaft End |
1 |
| Max. RPM [Max |
1.81 |