REXROTH Z2DB10VC2-4X/315 PRESSURE RELIEF VALVE
REXROTH Z2DB10VC2-4X/315 PRESSURE RELIEF VALVE Engineering Calculator , 25 ～ 50 T(mm) REXROTH PRESSURE RELIEF VALVE Manufacturing Service 15 Bearing I.D. d(mm) . Get BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. Bearings with Housin Type Your Free.
What is Z2DB10VC2-4X/315 bearing interchange？
| Brand Name: |
REXROTH |
| Model Number: |
Z2DB10VC2-4X/315 |
| GPM @ 1,800 rpm, Shaft End: |
45.0 LB |
| Rotation: |
Flange Mount |
| Weight: |
Right Hand (CW) |
| Shaft End Pressure [Max: |
2520VQ12A5-11DD20 |
| Shaft End Flow @ RPM: |
2 1/2 |
| Integral Valve Configuration: |
Flange |
| Minor Diameter [Min: |
N/A |
| Spline Description: |
Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Shaft End |
45.0 LB |
| Rotation |
Flange Mount |
| Weight |
Right Hand (CW) |
| Shaft End Pressure [Max |
2520VQ12A5-11DD20 |
| Shaft End Flow @ RPM |
2 1/2 |
| Integral Valve Configuration |
Flange |
| Minor Diameter [Min |
N/A |
| Spline Description |
Standard Pilot |
| Pump Series |
0.875 in |
| Cover End RPM [Max |
13 Tooth Splined |
| GPM @ 1,800 rpm, Cover End |
2520VQ |
| Seal Material |
1 3/8 in |
| Port Size |
Buna-N |
| Manufacturer Part No. |
2700 |
| Port Type |
0.715 in |
| Major Diameter [Min |
SAE B, 2 Bolt |
| Controlled Flow Rate |
Single Shaft Seal |
| Displacement Cover End (cu in/revolution) |
16/32 |
| Mounting Flange |
2700 |
| Pressure Port Size, Cover End |
2700 |
| Mounting |
N/A |
| Shaft Key |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
0.873 in |
| Cover End Flow @ RPM |
0.872 in |
| Shaft Seal Type |
N/A |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Relief Valve Setting |
N/A |
| Port Orientation - Cover End |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Minor Diameter [Max |
2520VQ12A5-11DD20 |
| Shaft Length |
3000 |
| Shaft End RPM [Max |
3000 |
| Pressure Port Size, Shaft End |
7.5 |
| Major Diameter [Max |
18 |
| Minor Diameter |
w/o Integral Valves |
| Pilot Type |
Outlet 135° CW from Inlet |
| Shaft Type |
Outlet 90° CW from Inlet |
| Shaft Dia. |
3/4 in Flange |
| Port Orientation - Shaft End |
1 in Flange |
| Max. RPM [Max |
1.1 |
| Model No. |
2.45 |