Transmission Pump Hydraulic Gear Pump 113-15-34800 for Bulldozer D31
| Rotation: |
15.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Shaft Dia.: |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: |
6 gal/min @ 1200 rpm |
| Manufacturer Part No.: |
1 |
| Port Type: |
NPT |
| Seal Material: |
N/A |
| Shaft Key: |
20 |
| PDF |
|
Product Details
| Rotation |
15.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Shaft Dia. |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End |
6 gal/min @ 1200 rpm |
| Manufacturer Part No. |
1 |
| Port Type |
NPT |
| Seal Material |
N/A |
| Shaft Key |
20 |
| Shaft Seal Type |
6 gpm @ 1200 rpm |
| Port Orientation - Cover End |
0.73 in |
| Pressure Port Size, Cover End |
11 Tooth Splined |
| Spline Description |
9 gpm @ 1750 rpm |
| Mounting Flange |
V10 |
| Cover End Flow @ RPM |
1 1/4 in |
| Max. RPM [Max |
Single |
| Minor Diameter [Max |
1/2 in NPT |
| Major Diameter [Max |
Buna-N |
| Weight |
3000 |
| Port Orientation - Shaft End |
2200 psi |
| Minor Diameter [Min |
9 |
| Relief Valve Setting |
P |
| Port Size |
SAE A, 2 Bolt |
| Pump Series |
P |
| Shaft Length |
1 |
| Minor Diameter |
Inline w/ Inlet |
| Displacement Cover End (cu in/revolution) |
1.2 |
| Pilot Type |
6 gal/min |
| Displacement Shaft End (cu in/revolution) |
Flow Control & Relief |
| GPM @ 1,800 rpm, Shaft End |
1750 psi |
| Integral Valve Configuration |
38C |