New Aftermarket PC225-7 Diesel Injection Fuel Feed Pump
| Model No.: |
32.0 LB |
| Port Orientation - Shaft End: |
Flange Mount |
| Shaft End Pressure [Max: |
Right Hand (CW) |
| Minor Diameter: |
12 gal/min @ 1200 rpm |
| GPM @ 1,800 rpm, Cover End: |
25VQ12A-11B20 |
| Pressure Port Size, Shaft End: |
1.5 |
| Port Type: |
Flange |
| Cover End Flow @ RPM: |
N/A |
| PDF |
|
Product Details
| Model No. |
32.0 LB |
| Port Orientation - Shaft End |
Flange Mount |
| Shaft End Pressure [Max |
Right Hand (CW) |
| Minor Diameter |
12 gal/min @ 1200 rpm |
| GPM @ 1,800 rpm, Cover End |
25VQ12A-11B20 |
| Pressure Port Size, Shaft End |
1.5 |
| Port Type |
Flange |
| Cover End Flow @ RPM |
N/A |
| Shaft Length |
20 |
| Controlled Flow Rate |
12 gpm @ 1200 rpm |
| Seal Material |
11 |
| Pump Series |
0.875 in |
| Integral Valve Configuration |
13 Tooth Splined |
| Major Diameter [Max |
18 gpm @ 1800 rpm |
| Spline Description |
25VQ |
| Major Diameter [Min |
1 3/8 in |
| Port Orientation - Cover End |
Single |
| Mounting Flange |
None |
| Pressure Port Size, Cover End |
1 in Flange |
| Shaft Seal Type |
Buna-N |
| Minor Diameter [Max |
2700 |
| Displacement Shaft End (cu in/revolution) |
3000 psi |
| Minor Diameter [Min |
18 |
| Displacement Cover End (cu in/revolution) |
A |
| Max. RPM [Max |
SAE B, 2 Bolt |
| Cover End RPM [Max |
Single Shaft Seal |
| Shaft End Flow @ RPM |
90° CCW from Inlet |
| Relief Valve Setting |
25VQ12A-11B20 |
| Shaft Dia. |
2.5 |
| GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |