20V/25V/35V/45V Hydraulic Vane Pump Drive Shaft Oil Seal
| Cover End Flow @ RPM: |
76.0 LB |
| Shaft End RPM [Max: |
Flange Mount |
| Port Type: |
Right Hand (CW) |
| Minor Diameter: |
3525V30A21-11AA22R |
| Displacement Cover End (cu in/revolution): |
3 |
| Cover End RPM [Max: |
Flange |
| Major Diameter [Min: |
N/A |
| Shaft Seal Type: |
Standard Pilot |
| PDF |
|
Product Details
| Cover End Flow @ RPM |
76.0 LB |
| Shaft End RPM [Max |
Flange Mount |
| Port Type |
Right Hand (CW) |
| Minor Diameter |
3525V30A21-11AA22R |
| Displacement Cover End (cu in/revolution) |
3 |
| Cover End RPM [Max |
Flange |
| Major Diameter [Min |
N/A |
| Shaft Seal Type |
Standard Pilot |
| Relief Valve Setting |
1.375 in |
| Manufacturer Part No. |
14 Tooth Splined |
| Integral Valve Configuration |
3525V |
| Seal Material |
2 5/16 in |
| Major Diameter [Max |
Buna-N |
| Pressure Port Size, Cover End |
1800 |
| Shaft Length |
1.055 in |
| Rotation |
SAE C, 2 Bolt |
| Shaft End Flow @ RPM |
Single Shaft Seal |
| Shaft End Pressure [Max |
12/24 |
| Shaft Dia. |
1800 |
| GPM @ 1,800 rpm, Shaft End |
1800 |
| Weight |
N/A |
| Spline Description |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Mounting |
1.25 in |
| Shaft Type |
1.247 in |
| Mounting Flange |
1.06 in |
| Cover End Pressure [Max |
1.05 in |
| Pressure Port Size, Shaft End |
N/A |
| Shaft Key |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Minor Diameter [Min |
3525V30A21-11AA22R |
| Pilot Type |
2500 |
| Model No. |
2500 |
| Minor Diameter [Max |
31.5 |
| Displacement Shaft End (cu in/revolution) |
45 |
| Max. RPM [Max |
N/A |
| Port Size |
Outlet 135° CCW from Inlet |
| GPM @ 1,800 rpm, Cover End |
Outlet Opposite Inlet |
| Pump Series |
1 in Code 61 |
| Port Orientation - Shaft End |
1 1/4 in Code 61 |
| Controlled Flow Rate |
4.1 |
| Port Orientation - Cover End |
5.9 |