9T7774 Barrel Cylinder Block for Cat D6H Tractor 12G,120G,130G,140G,160G Grader Pump Parts
| Spline Description: |
75.0 LB |
| Major Diameter [Max: |
Flange Mount |
| Shaft Key: |
Left Hand (CCW) |
| Pressure Port Size, Shaft End: |
3520VQ25A8-11DC20L |
| Cover End Pressure [Max: |
3 |
| Cover End RPM [Max: |
Flange |
| Pilot Type: |
N/A |
| Minor Diameter [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Spline Description |
75.0 LB |
| Major Diameter [Max |
Flange Mount |
| Shaft Key |
Left Hand (CCW) |
| Pressure Port Size, Shaft End |
3520VQ25A8-11DC20L |
| Cover End Pressure [Max |
3 |
| Cover End RPM [Max |
Flange |
| Pilot Type |
N/A |
| Minor Diameter [Max |
Standard Pilot |
| Port Size |
1.25 in |
| Weight |
14 Tooth Splined |
| Pump Series |
3520VQ |
| Rotation |
1 15/16 in |
| Model No. |
Buna-N |
| Controlled Flow Rate |
2500 |
| Shaft Type |
1.04 in |
| Shaft Seal Type |
SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Max. RPM [Max |
12/24 |
| Shaft End Flow @ RPM |
2500 |
| Port Orientation - Cover End |
2500 |
| Major Diameter [Min |
N/A |
| Manufacturer Part No. |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Minor Diameter |
1.248 in |
| Displacement Cover End (cu in/revolution) |
1.247 in |
| Seal Material |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Port Orientation - Shaft End |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Relief Valve Setting |
3520VQ25A8-11DC20L |
| Port Type |
3000 |
| Mounting |
3000 |
| Mounting Flange |
12 |
| Integral Valve Configuration |
37.5 |
| Pressure Port Size, Cover End |
w/o Integral Valves |
| Shaft End RPM [Max |
Outlet 45° CW from Inlet |
| Shaft Length |
Outlet 90° CW from Inlet |
| Shaft End Pressure [Max |
3/4 in Flange |
| Cover End Flow @ RPM |
1 1/4 in Flange |
| Minor Diameter [Min |
1.67 |
| Shaft Dia. |
4.98 |