6127-61-1008 Japan bulldozer D355C1 engine part SA6D155 water pump
| Weight: |
18.0 LB |
| Major Diameter [Max: |
Flange Mount |
| Minor Diameter: |
Right Hand (CW) |
| Seal Material: |
6 gal/min @ 1200 rpm |
| Shaft Length: |
1.25 |
| Integral Valve Configuration: |
BSPP |
| Minor Diameter [Max: |
3/16 in |
| Port Orientation - Shaft End: |
11 |
| PDF |
|
Product Details
| Weight |
18.0 LB |
| Major Diameter [Max |
Flange Mount |
| Minor Diameter |
Right Hand (CW) |
| Seal Material |
6 gal/min @ 1200 rpm |
| Shaft Length |
1.25 |
| Integral Valve Configuration |
BSPP |
| Minor Diameter [Max |
3/16 in |
| Port Orientation - Shaft End |
11 |
| Minor Diameter [Min |
6 gpm @ 1200 rpm |
| Controlled Flow Rate |
11 |
| Shaft End RPM [Max |
0.75 in |
| Relief Valve Setting |
Straight w/ Key |
| Shaft Key |
9 gpm @ 1750 rpm |
| Max. RPM [Max |
V20 |
| Mounting |
2.66 in |
| Shaft Seal Type |
Single |
| Pump Series |
3/4 in BSPP |
| Rotation |
Buna-N |
| Cover End Pressure [Max |
3400 |
| Shaft Type |
2500 psi |
| GPM @ 1,800 rpm, Shaft End |
9 |
| Spline Description |
B |
| Pressure Port Size, Shaft End |
SAE A, 2 Bolt |
| Mounting Flange |
B |
| Displacement Cover End (cu in/revolution) |
1 |
| Cover End Flow @ RPM |
Opposite Inlet Port |
| Port Size |
1.2 |
| Port Type |
w/o Integral Valves |
| Model No. |
1A |