Bulldozer D61 Hydraulic Oil Gear Pumps 705-51-20640
| Shaft Key: |
45.0 LB |
| Shaft End Flow @ RPM: |
Flange Mount |
| Controlled Flow Rate: |
Right Hand (CW) |
| Shaft Seal Type: |
2520VQP21A11-11CC3F-20 |
| Integral Valve Configuration: |
2 1/2 |
| GPM @ 1,800 rpm, Cover End: |
Flange |
| Major Diameter [Min: |
N/A |
| Pump Series: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Key |
45.0 LB |
| Shaft End Flow @ RPM |
Flange Mount |
| Controlled Flow Rate |
Right Hand (CW) |
| Shaft Seal Type |
2520VQP21A11-11CC3F-20 |
| Integral Valve Configuration |
2 1/2 |
| GPM @ 1,800 rpm, Cover End |
Flange |
| Major Diameter [Min |
N/A |
| Pump Series |
Standard Pilot |
| Shaft End Pressure [Max |
0.875 in |
| Seal Material |
13 Tooth Splined |
| Weight |
2520VQ |
| Mounting Flange |
1.375 in |
| Displacement Cover End (cu in/revolution) |
Buna-N |
| Mounting |
2500 |
| Port Orientation - Cover End |
0.715 in |
| Rotation |
SAE B, 2 Bolt |
| Minor Diameter |
Single Shaft Seal |
| Manufacturer Part No. |
16/32 |
| Shaft Dia. |
2700 |
| Displacement Shaft End (cu in/revolution) |
2500 |
| GPM @ 1,800 rpm, Shaft End |
3 gal/min |
| Port Type |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Model No. |
0.873 in |
| Cover End Flow @ RPM |
0.872 in |
| Shaft Type |
N/A |
| Spline Description |
N/A |
| Major Diameter [Max |
1500 psi |
| Relief Valve Setting |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Cover End RPM [Max |
2520VQP21A11-11CC3F-20 |
| Shaft End RPM [Max |
3000 |
| Minor Diameter [Max |
3000 |
| Pressure Port Size, Cover End |
16.5 |
| Pilot Type |
31.5 |
| Max. RPM [Max |
Priority Valve & Relief |
| Cover End Pressure [Max |
Outlet 45° CW from Inlet |
| Pressure Port Size, Shaft End |
Outlet Inline w/Inlet |
| Port Orientation - Shaft End |
3/4 in Flange |
| Minor Diameter [Min |
1 in Flange |
| Shaft Length |
2.22 |
| Port Size |
4.12 |