9T1080;9T-1080 1439722 Triple Hydraulic Steering Pump for Cat Tractor D10N D10R
| Port Orientation - Cover End: |
26.0 LB |
| Major Diameter [Max: |
Flange Mount |
| Shaft End Flow @ RPM: |
Right Hand (CW) |
| Shaft End RPM [Max: |
11 gal/min @ 1200 rpm |
| Pressure Port Size, Cover End: |
20V11A-151A22R |
| Shaft Key: |
1.5 |
| Max. RPM [Max: |
Flange |
| Minor Diameter [Max: |
N/A |
| PDF |
|
Product Details
| Port Orientation - Cover End |
26.0 LB |
| Major Diameter [Max |
Flange Mount |
| Shaft End Flow @ RPM |
Right Hand (CW) |
| Shaft End RPM [Max |
11 gal/min @ 1200 rpm |
| Pressure Port Size, Cover End |
20V11A-151A22R |
| Shaft Key |
1.5 |
| Max. RPM [Max |
Flange |
| Minor Diameter [Max |
N/A |
| Port Type |
22 |
| Pump Series |
11 gpm @ 1200 rpm |
| Shaft Type |
151 |
| Cover End Pressure [Max |
0.875 in |
| Weight |
13 Tooth Splined |
| Integral Valve Configuration |
16.5 gpm @ 1800 rpm |
| Minor Diameter [Min |
20V |
| Relief Valve Setting |
1 1/4 in |
| Displacement Shaft End (cu in/revolution) |
Single |
| Port Size |
None |
| Mounting Flange |
3/4 in Code 61 Flange |
| Port Orientation - Shaft End |
Buna-N |
| Pilot Type |
1800 |
| Rotation |
3000 psi |
| Shaft Length |
16 1/2 |
| Mounting |
SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| GPM @ 1,800 rpm, Shaft End |
Opposite Inlet Port |
| Major Diameter [Min |
20V11A-151A22R |
| Displacement Cover End (cu in/revolution) |
2.2 |
| Shaft End Pressure [Max |
w/o Integral Valves |