CAT Engine 513-4493 Fuel Filters Water Separator
| Minor Diameter [Max: |
75.0 LB |
| Displacement Cover End (cu in/revolution): |
Flange Mount |
| Shaft Length: |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End: |
3520V38E5-11BD22R |
| Rotation: |
3 |
| Major Diameter [Max: |
Flange |
| Minor Diameter: |
N/A |
| Shaft Dia.: |
Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter [Max |
75.0 LB |
| Displacement Cover End (cu in/revolution) |
Flange Mount |
| Shaft Length |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End |
3520V38E5-11BD22R |
| Rotation |
3 |
| Major Diameter [Max |
Flange |
| Minor Diameter |
N/A |
| Shaft Dia. |
Standard Pilot |
| Port Orientation - Cover End |
1.375 in |
| Shaft Type |
14 Tooth Splined |
| Port Size |
3520V |
| Minor Diameter [Min |
2.3125 in |
| Seal Material |
Buna-N |
| Controlled Flow Rate |
1800 |
| Port Type |
1.055 in |
| Mounting |
SAE C, 2 Bolt |
| Pilot Type |
Single Shaft Seal |
| Pump Series |
12/24 |
| Mounting Flange |
1800 |
| Shaft End Pressure [Max |
1800 |
| Model No. |
N/A |
| Weight |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Min |
1.25 in |
| Displacement Shaft End (cu in/revolution) |
1.247 in |
| Manufacturer Part No. |
1.06 in |
| Shaft End RPM [Max |
1.05 in |
| Shaft Key |
N/A |
| Shaft End Flow @ RPM |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
3520V38E5-11BD22R |
| GPM @ 1,800 rpm, Cover End |
3000 |
| Spline Description |
2500 |
| Pressure Port Size, Shaft End |
7.5 |
| Cover End RPM [Max |
57 |
| Max. RPM [Max |
N/A |
| Integral Valve Configuration |
Outlet 135° CW from Inlet |
| Shaft Seal Type |
Outlet 90° CCW from Inlet |
| Relief Valve Setting |
3/4 in Code 61 |
| Port Orientation - Shaft End |
1 1/4 in Code 61 |
| Cover End Pressure [Max |
1.1 |
| Pressure Port Size, Cover End |
7.4 |