Hydraulic Steering Pump 07440-72202 for Bulldozer D155A-2 Spare Parts
| Shaft Type: |
45.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Minor Diameter: |
Left Hand (CCW) |
| Pump Series: |
2520VQ12C5-11CC20LH |
| Seal Material: |
2.5 |
| Minor Diameter [Min: |
Flange |
| Displacement Cover End (cu in/revolution): |
N/A |
| Shaft Dia.: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Type |
45.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Minor Diameter |
Left Hand (CCW) |
| Pump Series |
2520VQ12C5-11CC20LH |
| Seal Material |
2.5 |
| Minor Diameter [Min |
Flange |
| Displacement Cover End (cu in/revolution) |
N/A |
| Shaft Dia. |
Standard Pilot |
| Pilot Type |
0.875 in |
| Major Diameter [Max |
13 Tooth Splined |
| Relief Valve Setting |
2520VQ |
| Controlled Flow Rate |
1 3/8 in |
| Cover End RPM [Max |
Double |
| Spline Description |
Buna-N |
| Shaft Seal Type |
2700 |
| Pressure Port Size, Cover End |
0.715 in |
| Port Size |
SAE B, 2 Bolt |
| Port Orientation - Shaft End |
Single Shaft Seal |
| Manufacturer Part No. |
16/32 |
| Rotation |
2700 |
| Minor Diameter [Max |
2700 |
| Shaft Key |
N/A |
| Model No. |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
0.873 in |
| Major Diameter [Min |
0.872 in |
| Mounting |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Cover End Flow @ RPM |
N/A |
| Integral Valve Configuration |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Max. RPM [Max |
2520VQ12C5-11CC20LH |
| GPM @ 1,800 rpm, Cover End |
3000 |
| Mounting Flange |
3000 |
| Port Orientation - Cover End |
7.5 |
| Shaft End RPM [Max |
18 |
| Shaft End Flow @ RPM |
w/o Integral Valves |
| Pressure Port Size, Shaft End |
Outlet 45° CW from Inlet |
| Port Type |
Outlet Inline w/Inlet |
| Shaft Length |
1 1/16 in SAE O-Ring |
| Weight |
1 5/16 in SAE O-Ring |
| Displacement Shaft End (cu in/revolution) |
2.5 |