High Pressure Rexroth A2FM Series A2FM56/61W Piston Hydraulic Motor A2FM56
| Displacement Cover End (cu in/revolution): |
76.0 LB |
| Shaft Length: |
Flange Mount |
| Shaft Seal Type: |
Right Hand (CW) |
| Pump Series: |
3525VQ38A12-11BB20 |
| Mounting Flange: |
3 |
| Rotation: |
Flange |
| Shaft Key: |
N/A |
| Seal Material: |
Standard Pilot |
| PDF |
|
Product Details
| Displacement Cover End (cu in/revolution) |
76.0 LB |
| Shaft Length |
Flange Mount |
| Shaft Seal Type |
Right Hand (CW) |
| Pump Series |
3525VQ38A12-11BB20 |
| Mounting Flange |
3 |
| Rotation |
Flange |
| Shaft Key |
N/A |
| Seal Material |
Standard Pilot |
| Cover End Pressure [Max |
1.25 in |
| Pilot Type |
14 Tooth Splined |
| Port Type |
3525VQ |
| Shaft End Flow @ RPM |
1 15/16 in |
| Shaft Dia. |
Buna-N |
| Cover End RPM [Max |
2400 |
| Pressure Port Size, Cover End |
1.04 in |
| Mounting |
SAE C, 2 Bolt |
| Controlled Flow Rate |
Single Shaft Seal |
| Minor Diameter [Min |
12/24 |
| Max. RPM [Max |
2500 |
| Minor Diameter [Max |
2400 |
| Weight |
N/A |
| Shaft Type |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
1.248 in |
| GPM @ 1,800 rpm, Shaft End |
1.247 in |
| Major Diameter [Min |
N/A |
| Shaft End Pressure [Max |
N/A |
| Minor Diameter |
N/A |
| Cover End Flow @ RPM |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End |
3525VQ38A12-11BB20 |
| Port Orientation - Shaft End |
3000 |
| Port Size |
3000 |
| GPM @ 1,800 rpm, Cover End |
18 |
| Port Orientation - Cover End |
57 |
| Shaft End RPM [Max |
w/o Integral Valves |
| Manufacturer Part No. |
Outlet 45° CCW from Inlet |
| Major Diameter [Max |
Outlet 90° CCW from Inlet |
| Spline Description |
1 in Flange |
| Relief Valve Setting |
1 1/4 in Flange |
| Model No. |
2.45 |
| Integral Valve Configuration |
7.42 |