Replacement hydraulic pump for mini excavator
| Minor Diameter [Max: |
76.0 LB |
| Port Orientation - Shaft End: |
Flange Mount |
| Spline Description: |
Right Hand (CW) |
| Displacement Cover End (cu in/revolution): |
3525VQ30A21-11BB20 |
| Minor Diameter [Min: |
3 |
| Relief Valve Setting: |
Flange |
| Max. RPM [Max: |
N/A |
| Shaft End Flow @ RPM: |
Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter [Max |
76.0 LB |
| Port Orientation - Shaft End |
Flange Mount |
| Spline Description |
Right Hand (CW) |
| Displacement Cover End (cu in/revolution) |
3525VQ30A21-11BB20 |
| Minor Diameter [Min |
3 |
| Relief Valve Setting |
Flange |
| Max. RPM [Max |
N/A |
| Shaft End Flow @ RPM |
Standard Pilot |
| Model No. |
1.25 in |
| Cover End RPM [Max |
14 Tooth Splined |
| Displacement Shaft End (cu in/revolution) |
3525VQ |
| Shaft Key |
1 15/16 in |
| Shaft End RPM [Max |
Buna-N |
| Integral Valve Configuration |
2500 |
| Controlled Flow Rate |
1.04 in |
| Major Diameter [Max |
SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End |
Single Shaft Seal |
| Mounting Flange |
12/24 |
| Pump Series |
2500 |
| Manufacturer Part No. |
2500 |
| Weight |
N/A |
| Port Orientation - Cover End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Seal Material |
1.248 in |
| Pilot Type |
1.247 in |
| Minor Diameter |
N/A |
| Shaft End Pressure [Max |
N/A |
| Mounting |
N/A |
| Cover End Pressure [Max |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Shaft Length |
3525VQ30A21-11BB20 |
| Port Size |
3000 |
| Rotation |
3000 |
| Pressure Port Size, Cover End |
31.5 |
| Port Type |
45 |
| Shaft Type |
w/o Integral Valves |
| Pressure Port Size, Shaft End |
Outlet 45° CCW from Inlet |
| Major Diameter [Min |
Outlet 90° CCW from Inlet |
| Cover End Flow @ RPM |
1 in Flange |
| Shaft Dia. |
1 1/4 in Flange |
| GPM @ 1,800 rpm, Cover End |
4.12 |
| Shaft Seal Type |
5.96 |