KP1009CHFSS Hydraulic Gear Charge Pump for Cat E200B Excavator
| Port Type: |
45.0 LB |
| Rotation: |
Flange Mount |
| Port Orientation - Shaft End: |
Right Hand (CW) |
| Shaft End Flow @ RPM: |
2520VQ17A8-11DD20 |
| Weight: |
2 1/2 |
| Pump Series: |
Flange |
| Shaft Length: |
N/A |
| GPM @ 1,800 rpm, Cover End: |
Standard Pilot |
| PDF |
|
Product Details
| Port Type |
45.0 LB |
| Rotation |
Flange Mount |
| Port Orientation - Shaft End |
Right Hand (CW) |
| Shaft End Flow @ RPM |
2520VQ17A8-11DD20 |
| Weight |
2 1/2 |
| Pump Series |
Flange |
| Shaft Length |
N/A |
| GPM @ 1,800 rpm, Cover End |
Standard Pilot |
| Port Size |
0.875 in |
| Integral Valve Configuration |
13 Tooth Splined |
| Shaft End RPM [Max |
2520VQ |
| Max. RPM [Max |
1 3/8 in |
| Controlled Flow Rate |
Buna-N |
| Pressure Port Size, Shaft End |
2500 |
| Seal Material |
0.715 in |
| Cover End Pressure [Max |
SAE B, 2 Bolt |
| Model No. |
Single Shaft Seal |
| Shaft Key |
16/32 |
| Minor Diameter [Max |
2700 |
| Minor Diameter |
2500 |
| Shaft Type |
N/A |
| Shaft End Pressure [Max |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Manufacturer Part No. |
0.873 in |
| Port Orientation - Cover End |
0.872 in |
| Cover End RPM [Max |
N/A |
| Cover End Flow @ RPM |
N/A |
| Mounting |
N/A |
| Major Diameter [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Relief Valve Setting |
2520VQ17A8-11DD20 |
| Displacement Cover End (cu in/revolution) |
3000 |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Major Diameter [Min |
12 |
| Pilot Type |
25.5 |
| Shaft Dia. |
w/o Integral Valves |
| Pressure Port Size, Cover End |
Outlet 135° CW from Inlet |
| Minor Diameter [Min |
Outlet 90° CW from Inlet |
| Shaft Seal Type |
3/4 in Flange |
| Mounting Flange |
1 in Flange |
| Displacement Shaft End (cu in/revolution) |
1.67 |
| Spline Description |
3.37 |