Bulldozer D50 Spare Parts Hydraulic Gear Oil Pump 07400-40400
| Rotation: |
75.0 LB |
| Cover End Flow @ RPM: |
Flange Mount |
| Mounting: |
Right Hand (CW) |
| Spline Description: |
3520VQ25A5-1AA20 |
| Shaft Dia.: |
3 |
| Shaft Type: |
Flange |
| GPM @ 1,800 rpm, Shaft End: |
5/16 in |
| Displacement Shaft End (cu in/revolution): |
Standard Pilot |
| PDF |
|
Product Details
| Rotation |
75.0 LB |
| Cover End Flow @ RPM |
Flange Mount |
| Mounting |
Right Hand (CW) |
| Spline Description |
3520VQ25A5-1AA20 |
| Shaft Dia. |
3 |
| Shaft Type |
Flange |
| GPM @ 1,800 rpm, Shaft End |
5/16 in |
| Displacement Shaft End (cu in/revolution) |
Standard Pilot |
| Controlled Flow Rate |
1.25 in |
| Shaft End Pressure [Max |
Straight w/ Key |
| Minor Diameter |
3520VQ |
| Model No. |
2.5 in |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Port Type |
2500 |
| Shaft End RPM [Max |
N/A |
| Port Orientation - Cover End |
SAE C, 2 Bolt |
| Manufacturer Part No. |
Single Shaft Seal |
| Cover End RPM [Max |
N/A |
| Pressure Port Size, Shaft End |
2500 |
| Shaft End Flow @ RPM |
2500 |
| Pressure Port Size, Cover End |
N/A |
| Major Diameter [Min |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Mounting Flange |
N/A |
| Shaft Key |
N/A |
| Pump Series |
N/A |
| Shaft Seal Type |
N/A |
| Pilot Type |
N/A |
| Relief Valve Setting |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
3520VQ25A5-1AA20 |
| Minor Diameter [Min |
3000 |
| Cover End Pressure [Max |
3000 |
| Weight |
7.5 |
| Shaft Length |
37.5 |
| Max. RPM [Max |
w/o Integral Valves |
| Seal Material |
Outlet 135° CCW from Inlet |
| Integral Valve Configuration |
Outlet Opposite Inlet |
| Minor Diameter [Max |
3/4 in Flange |
| Port Orientation - Shaft End |
1 1/4 in Flange |
| Port Size |
1.1 |
| Major Diameter [Max |
4.98 |