P315 P330 P350 P365 Hydraulic Bearing Gear Oil Pump Tandem Pump
| Displacement Shaft End (cu in/revolution): |
101.0 LB |
| Port Size: |
Flange Mount |
| GPM @ 1,800 rpm, Cover End: |
Right Hand (CW) |
| Shaft End Flow @ RPM: |
4525V50A21-11BB22R |
| Shaft Seal Type: |
3 1/2 |
| Mounting: |
Flange |
| Displacement Cover End (cu in/revolution): |
N/A |
| Pilot Type: |
Standard Pilot |
| PDF |
|
Product Details
| Displacement Shaft End (cu in/revolution) |
101.0 LB |
| Port Size |
Flange Mount |
| GPM @ 1,800 rpm, Cover End |
Right Hand (CW) |
| Shaft End Flow @ RPM |
4525V50A21-11BB22R |
| Shaft Seal Type |
3 1/2 |
| Mounting |
Flange |
| Displacement Cover End (cu in/revolution) |
N/A |
| Pilot Type |
Standard Pilot |
| Port Orientation - Cover End |
1.56 in |
| Model No. |
14 Tooth Splined |
| Shaft End RPM [Max |
4525V |
| Rotation |
2 7/16 in |
| Shaft Key |
Buna-N |
| Max. RPM [Max |
1800 |
| Relief Valve Setting |
1.055 in |
| Shaft Length |
SAE C, 2 Bolt |
| Major Diameter [Min |
Single Shaft Seal |
| Pressure Port Size, Cover End |
12/24 |
| Shaft Type |
1800 |
| Cover End RPM [Max |
1800 |
| Integral Valve Configuration |
N/A |
| Major Diameter [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
1.25 in |
| Controlled Flow Rate |
1.247 in |
| Cover End Flow @ RPM |
1.06 in |
| Shaft Dia. |
1.05 in |
| Minor Diameter |
N/A |
| Mounting Flange |
50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm |
| Spline Description |
4525V50A21-11BB22R |
| Minor Diameter [Min |
2500 |
| Port Type |
2500 |
| Cover End Pressure [Max |
31.5 |
| Manufacturer Part No. |
75 |
| Pressure Port Size, Shaft End |
N/A |
| Minor Diameter [Max |
Outlet 45° CCW from Inlet |
| Seal Material |
Outlet 90° CCW from Inlet |
| Port Orientation - Shaft End |
1 in Code 61 |
| Weight |
1 1/2 in Code 61 |
| Shaft End Pressure [Max |
4.1 |
| Pump Series |
9.9 |