Replace Parker Commercial Air or Manual Control Gear Pump G101 G102 For Dump Truck
| Shaft End Flow @ RPM: |
75.0 LB |
| Shaft Seal Type: |
Flange Mount |
| GPM @ 1,800 rpm, Cover End: |
Right Hand (CW) |
| Shaft End RPM [Max: |
3520VQ30A5-1BB20 |
| Shaft Length: |
3 |
| Pressure Port Size, Cover End: |
Flange |
| Cover End RPM [Max: |
5/16 in |
| Manufacturer Part No.: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft End Flow @ RPM |
75.0 LB |
| Shaft Seal Type |
Flange Mount |
| GPM @ 1,800 rpm, Cover End |
Right Hand (CW) |
| Shaft End RPM [Max |
3520VQ30A5-1BB20 |
| Shaft Length |
3 |
| Pressure Port Size, Cover End |
Flange |
| Cover End RPM [Max |
5/16 in |
| Manufacturer Part No. |
Standard Pilot |
| Model No. |
1.25 in |
| Mounting |
Straight w/ Key |
| Pressure Port Size, Shaft End |
3520VQ |
| Pilot Type |
2.5 in |
| GPM @ 1,800 rpm, Shaft End |
Buna-N |
| Major Diameter [Min |
2500 |
| Displacement Cover End (cu in/revolution) |
N/A |
| Minor Diameter [Max |
SAE C, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Cover End Pressure [Max |
N/A |
| Rotation |
2500 |
| Shaft Type |
2500 |
| Minor Diameter |
N/A |
| Relief Valve Setting |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Weight |
N/A |
| Port Orientation - Shaft End |
N/A |
| Max. RPM [Max |
N/A |
| Controlled Flow Rate |
N/A |
| Seal Material |
N/A |
| Shaft Key |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
3520VQ30A5-1BB20 |
| Mounting Flange |
3000 |
| Cover End Flow @ RPM |
3000 |
| Spline Description |
7.5 |
| Pump Series |
45 |
| Port Orientation - Cover End |
w/o Integral Valves |
| Integral Valve Configuration |
Outlet 45° CCW from Inlet |
| Minor Diameter [Min |
Outlet 90° CCW from Inlet |
| Shaft End Pressure [Max |
3/4 in Flange |
| Port Type |
1 1/4 in Flange |
| Major Diameter [Max |
1.1 |
| Port Size |
5.96 |