1832823 2W2605 8N0490 3306 Engine Diesel Fuel Injection Priming Pump
| Controlled Flow Rate: |
30.0 LB |
| Cover End RPM [Max: |
Flange Mount |
| Minor Diameter [Max: |
Left Hand (CCW) |
| Pump Series: |
V2010-1F13S7S-1AA12-LH |
| Mounting Flange: |
1 1/2 |
| Cover End Flow @ RPM: |
Flange |
| Relief Valve Setting: |
3/16 in |
| Port Orientation - Shaft End: |
N/A |
| PDF |
|
Product Details
| Controlled Flow Rate |
30.0 LB |
| Cover End RPM [Max |
Flange Mount |
| Minor Diameter [Max |
Left Hand (CCW) |
| Pump Series |
V2010-1F13S7S-1AA12-LH |
| Mounting Flange |
1 1/2 |
| Cover End Flow @ RPM |
Flange |
| Relief Valve Setting |
3/16 in |
| Port Orientation - Shaft End |
N/A |
| Model No. |
0.875 in |
| GPM @ 1,800 rpm, Shaft End |
Straight w/ Key |
| Shaft Seal Type |
V2010 |
| Displacement Shaft End (cu in/revolution) |
2.3125 in |
| Shaft Length |
Buna-N |
| Port Size |
2400 |
| Cover End Pressure [Max |
N/A |
| Shaft End RPM [Max |
SAE B, 2 Bolt |
| Shaft End Pressure [Max |
Single Shaft Seal |
| Weight |
N/A |
| Max. RPM [Max |
2800 |
| Mounting |
2400 |
| Major Diameter [Max |
N/A |
| Spline Description |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Integral Valve Configuration |
N/A |
| Pilot Type |
N/A |
| Port Orientation - Cover End |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Displacement Cover End (cu in/revolution) |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Shaft Dia. |
V2010-1F13S7S-1AA12-LH |
| Shaft Key |
2000 |
| Manufacturer Part No. |
2200 |
| Minor Diameter |
10.5 |
| Major Diameter [Min |
19.5 |
| Rotation |
N/A |
| Shaft Type |
Outlet 135° CCW from Inlet |
| Port Type |
Outlet Opposite Inlet |
| Pressure Port Size, Cover End |
1/2 in SAE O-Ring |
| Shaft End Flow @ RPM |
3/4 in SAE O-Ring |
| Seal Material |
1.39 |
| Minor Diameter [Min |
2.59 |