Hydstar Oil Pump 6209-51-1700 for S6D95L Engine PC200 Excavator
| Mounting Flange: |
76.0 LB |
| Cover End Pressure [Max: |
Flange Mount |
| Cover End RPM [Max: |
Right Hand (CW) |
| Shaft End RPM [Max: |
3525VQ35A21-11AC20 |
| Shaft Seal Type: |
3 |
| GPM @ 1,800 rpm, Cover End: |
Flange |
| Displacement Shaft End (cu in/revolution): |
N/A |
| Minor Diameter [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Mounting Flange |
76.0 LB |
| Cover End Pressure [Max |
Flange Mount |
| Cover End RPM [Max |
Right Hand (CW) |
| Shaft End RPM [Max |
3525VQ35A21-11AC20 |
| Shaft Seal Type |
3 |
| GPM @ 1,800 rpm, Cover End |
Flange |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Minor Diameter [Max |
Standard Pilot |
| Cover End Flow @ RPM |
1.25 in |
| Port Type |
14 Tooth Splined |
| Controlled Flow Rate |
3525VQ |
| Shaft End Pressure [Max |
1 15/16 in |
| Relief Valve Setting |
Buna-N |
| Rotation |
2400 |
| Major Diameter [Max |
1.04 in |
| Shaft Length |
SAE C, 2 Bolt |
| Pump Series |
Single Shaft Seal |
| Pilot Type |
12/24 |
| Shaft Key |
2500 |
| Spline Description |
2400 |
| Shaft End Flow @ RPM |
N/A |
| Mounting |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
1.248 in |
| Pressure Port Size, Shaft End |
1.247 in |
| Seal Material |
N/A |
| Weight |
N/A |
| Integral Valve Configuration |
N/A |
| Major Diameter [Min |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
3525VQ35A21-11AC20 |
| Max. RPM [Max |
3000 |
| Minor Diameter [Min |
3000 |
| Port Orientation - Cover End |
31.5 |
| Model No. |
52.5 |
| Shaft Type |
w/o Integral Valves |
| Port Size |
Outlet 45° CW from Inlet |
| Manufacturer Part No. |
Outlet Opposite Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| GPM @ 1,800 rpm, Shaft End |
1 1/4 in Flange |
| Shaft Dia. |
4.12 |
| Minor Diameter |
6.88 |