Triple Hydraulic Gear Pump 705-55-34190
| Port Orientation - Cover End: |
30.0 LB |
| Controlled Flow Rate: |
Flange Mount |
| Cover End Pressure [Max: |
Right Hand (CW) |
| Shaft End Flow @ RPM: |
V2010-1F9S7S-11DD12 |
| Displacement Cover End (cu in/revolution): |
1 1/2 |
| Seal Material: |
Flange |
| Pump Series: |
N/A |
| Rotation: |
N/A |
| PDF |
|
Product Details
| Port Orientation - Cover End |
30.0 LB |
| Controlled Flow Rate |
Flange Mount |
| Cover End Pressure [Max |
Right Hand (CW) |
| Shaft End Flow @ RPM |
V2010-1F9S7S-11DD12 |
| Displacement Cover End (cu in/revolution) |
1 1/2 |
| Seal Material |
Flange |
| Pump Series |
N/A |
| Rotation |
N/A |
| Displacement Shaft End (cu in/revolution) |
0.875 in |
| Port Size |
13 Tooth Splined |
| Max. RPM [Max |
V2010 |
| Relief Valve Setting |
1 5/16 in |
| Cover End Flow @ RPM |
Buna-N |
| Minor Diameter [Max |
2800 |
| Shaft End RPM [Max |
0.728 in |
| Major Diameter [Min |
SAE B, 2 Bolt |
| Shaft Type |
Single Shaft Seal |
| Port Type |
16/32 |
| Major Diameter [Max |
2800 |
| Mounting Flange |
2800 |
| Shaft Key |
N/A |
| Mounting |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Pilot Type |
0.873 in |
| Minor Diameter [Min |
0.872 in |
| Shaft Dia. |
0.7335 in |
| GPM @ 1,800 rpm, Cover End |
0.7225 in |
| Spline Description |
N/A |
| Shaft Seal Type |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Model No. |
V2010-1F9S7S-11DD12 |
| GPM @ 1,800 rpm, Shaft End |
2000 |
| Weight |
2500 |
| Cover End RPM [Max |
10.5 |
| Port Orientation - Shaft End |
13.5 |
| Pressure Port Size, Shaft End |
N/A |
| Integral Valve Configuration |
Outlet 135° CW from Inlet |
| Pressure Port Size, Cover End |
Outlet 90° CW from Inlet |
| Manufacturer Part No. |
1/2 in SAE O-Ring |
| Minor Diameter |
3/4 in SAE O-Ring |
| Shaft Length |
1.39 |
| Shaft End Pressure [Max |
1.81 |