259-0814 2590814 Hydraulic Drive Fan Pump for CAT Excavator 345C
| Port Type: |
45.0 LB |
| GPM @ 1,800 rpm, Shaft End: |
Flange Mount |
| Cover End RPM [Max: |
Right Hand (CW) |
| Relief Valve Setting: |
2520VQ21A5-1DD20 |
| Integral Valve Configuration: |
2.5 |
| Model No.: |
Flange |
| Shaft Dia.: |
3/16 in |
| Minor Diameter: |
Standard Pilot |
| PDF |
|
Product Details
| Port Type |
45.0 LB |
| GPM @ 1,800 rpm, Shaft End |
Flange Mount |
| Cover End RPM [Max |
Right Hand (CW) |
| Relief Valve Setting |
2520VQ21A5-1DD20 |
| Integral Valve Configuration |
2.5 |
| Model No. |
Flange |
| Shaft Dia. |
3/16 in |
| Minor Diameter |
Standard Pilot |
| Shaft Type |
0.875 in |
| Manufacturer Part No. |
Straight w/ Key |
| Seal Material |
2520VQ |
| Shaft Seal Type |
1 15/16 in |
| Pump Series |
Double |
| Pressure Port Size, Shaft End |
Buna-N |
| Port Orientation - Shaft End |
2500 |
| Minor Diameter [Min |
N/A |
| Mounting |
SAE B, 2 Bolt |
| Shaft Key |
Single Shaft Seal |
| Displacement Cover End (cu in/revolution) |
N/A |
| GPM @ 1,800 rpm, Cover End |
2700 |
| Major Diameter [Min |
2500 |
| Pressure Port Size, Cover End |
N/A |
| Weight |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
N/A |
| Controlled Flow Rate |
N/A |
| Mounting Flange |
N/A |
| Cover End Flow @ RPM |
N/A |
| Shaft Length |
N/A |
| Minor Diameter [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
3000 |
| Pilot Type |
7.5 |
| Spline Description |
31.5 |
| Port Size |
w/o Integral Valves |
| Shaft End RPM [Max |
Outlet 135° CW from Inlet |
| Max. RPM [Max |
Outlet 90° CW from Inlet |
| Rotation |
3/4 in Flange |
| Port Orientation - Cover End |
1 in Flange |
| Major Diameter [Max |
1.1 |