Main Clutch Pump 07421-71401 for Bulldozer D20A D20P D20Q D20S
| Minor Diameter: |
75.0 LB |
| Shaft End RPM [Max: |
Flange Mount |
| Relief Valve Setting: |
Left Hand (CCW) |
| Seal Material: |
3520VQ35A12-11AA20-LH |
| Minor Diameter [Max: |
3 |
| Pressure Port Size, Cover End: |
Flange |
| Weight: |
N/A |
| Port Type: |
Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter |
75.0 LB |
| Shaft End RPM [Max |
Flange Mount |
| Relief Valve Setting |
Left Hand (CCW) |
| Seal Material |
3520VQ35A12-11AA20-LH |
| Minor Diameter [Max |
3 |
| Pressure Port Size, Cover End |
Flange |
| Weight |
N/A |
| Port Type |
Standard Pilot |
| Mounting |
1.25 in |
| Shaft Type |
14 Tooth Splined |
| Max. RPM [Max |
3520VQ |
| Port Size |
1 15/16 in |
| Controlled Flow Rate |
Buna-N |
| Pressure Port Size, Shaft End |
2400 |
| Port Orientation - Shaft End |
1.04 in |
| Shaft End Flow @ RPM |
SAE C, 2 Bolt |
| Displacement Shaft End (cu in/revolution) |
Single Shaft Seal |
| GPM @ 1,800 rpm, Shaft End |
12/24 |
| Mounting Flange |
2500 |
| Pilot Type |
2400 |
| Displacement Cover End (cu in/revolution) |
N/A |
| Manufacturer Part No. |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Model No. |
1.248 in |
| Shaft End Pressure [Max |
1.247 in |
| Major Diameter [Max |
N/A |
| Shaft Length |
N/A |
| Cover End Pressure [Max |
N/A |
| Cover End Flow @ RPM |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Major Diameter [Min |
3520VQ35A12-11AA20-LH |
| Cover End RPM [Max |
2300 |
| Spline Description |
3000 |
| Shaft Key |
18 |
| Port Orientation - Cover End |
52.5 |
| Rotation |
w/o Integral Valves |
| Shaft Dia. |
Outlet 135° CCW from Inlet |
| Integral Valve Configuration |
Outlet Opposite Inlet |
| Pump Series |
3/4 in Flange |
| Minor Diameter [Min |
1 1/4 in Flange |
| Shaft Seal Type |
2.41 |
| GPM @ 1,800 rpm, Cover End |
6.88 |