CAT Excavator 320C 102MM Piston 297-7750 for 3066 Engine Spare Parts
| Mounting Flange: |
76.0 LB |
| Shaft Key: |
Flange Mount |
| Cover End Pressure [Max: |
Right Hand (CW) |
| Model No.: |
3525VQ25A17-11DD20 |
| Shaft End Pressure [Max: |
3 |
| GPM @ 1,800 rpm, Cover End: |
Flange |
| Mounting: |
N/A |
| Port Type: |
Standard Pilot |
| PDF |
|
Product Details
| Mounting Flange |
76.0 LB |
| Shaft Key |
Flange Mount |
| Cover End Pressure [Max |
Right Hand (CW) |
| Model No. |
3525VQ25A17-11DD20 |
| Shaft End Pressure [Max |
3 |
| GPM @ 1,800 rpm, Cover End |
Flange |
| Mounting |
N/A |
| Port Type |
Standard Pilot |
| Pump Series |
1.25 in |
| Major Diameter [Max |
14 Tooth Splined |
| Pressure Port Size, Shaft End |
3525VQ |
| Shaft End Flow @ RPM |
1.9375 in |
| Relief Valve Setting |
Buna-N |
| Shaft Dia. |
2500 |
| Minor Diameter [Max |
1.04 in |
| Port Size |
SAE C, 2 Bolt |
| Integral Valve Configuration |
Single Shaft Seal |
| Minor Diameter |
12/24 |
| Cover End RPM [Max |
2500 |
| Displacement Cover End (cu in/revolution) |
2500 |
| Port Orientation - Cover End |
N/A |
| Manufacturer Part No. |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Shaft Seal Type |
1.248 in |
| Shaft Length |
1.247 in |
| Port Orientation - Shaft End |
N/A |
| Spline Description |
N/A |
| Pilot Type |
N/A |
| Shaft Type |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
3525VQ25A17-11DD20 |
| Max. RPM [Max |
3000 |
| Pressure Port Size, Cover End |
3000 |
| Cover End Flow @ RPM |
25.5 |
| Seal Material |
37.5 |
| Weight |
w/o Integral Valves |
| Shaft End RPM [Max |
Outlet 135° CW from Inlet |
| Major Diameter [Min |
Outlet 90° CW from Inlet |
| Rotation |
1 in Flange |
| GPM @ 1,800 rpm, Shaft End |
1 1/4 in Flange |
| Controlled Flow Rate |
3.37 |
| Minor Diameter [Min |
4.98 |