Bulldozer D355C-3 Transmission Gear Pump 07434-72202
| Spline Description: |
32.0 LB |
| Model No.: |
Flange Mount |
| Displacement Shaft End (cu in/revolution): |
Right Hand (CW) |
| Major Diameter [Min: |
25VQ12A-11A20 |
| Port Orientation - Shaft End: |
1 1/2 |
| Minor Diameter: |
Flange |
| Weight: |
N/A |
| Shaft Key: |
20 |
| PDF |
|
Product Details
| Spline Description |
32.0 LB |
| Model No. |
Flange Mount |
| Displacement Shaft End (cu in/revolution) |
Right Hand (CW) |
| Major Diameter [Min |
25VQ12A-11A20 |
| Port Orientation - Shaft End |
1 1/2 |
| Minor Diameter |
Flange |
| Weight |
N/A |
| Shaft Key |
20 |
| Seal Material |
12 gpm @ 1200 rpm |
| Rotation |
11 |
| Mounting |
0.875 in |
| Port Size |
13 Tooth Splined |
| GPM @ 1,800 rpm, Cover End |
18 gpm @ 1800 rpm |
| Major Diameter [Max |
25VQ |
| Minor Diameter [Max |
1 3/8 in |
| Relief Valve Setting |
None |
| Shaft Dia. |
1 in Flange |
| GPM @ 1,800 rpm, Shaft End |
Buna-N |
| Shaft End Flow @ RPM |
2700 |
| Shaft End RPM [Max |
3000 psi |
| Shaft Type |
18 |
| Manufacturer Part No. |
A |
| Cover End Flow @ RPM |
SAE B, 2 Bolt |
| Shaft End Pressure [Max |
Single Shaft Seal |
| Pilot Type |
Opposite Inlet Port |
| Pressure Port Size, Shaft End |
25VQ12A-11A20 |
| Controlled Flow Rate |
2.45 |
| Integral Valve Configuration |
w/o Integral Valves |