Replacement Shimadzu SGP1 Forklift Parts Hydraulic Pump
| Manufacturer Part No.: |
45.0 LB |
| Cover End Flow @ RPM: |
Flange Mount |
| Minor Diameter [Min: |
Right Hand (CW) |
| Displacement Cover End (cu in/revolution): |
2520VQ21A8-11AA20 |
| Shaft Key: |
2 1/2 |
| GPM @ 1,800 rpm, Shaft End: |
Flange |
| Shaft Seal Type: |
N/A |
| Port Size: |
Standard Pilot |
| PDF |
|
Product Details
| Manufacturer Part No. |
45.0 LB |
| Cover End Flow @ RPM |
Flange Mount |
| Minor Diameter [Min |
Right Hand (CW) |
| Displacement Cover End (cu in/revolution) |
2520VQ21A8-11AA20 |
| Shaft Key |
2 1/2 |
| GPM @ 1,800 rpm, Shaft End |
Flange |
| Shaft Seal Type |
N/A |
| Port Size |
Standard Pilot |
| GPM @ 1,800 rpm, Cover End |
0.875 in |
| Cover End Pressure [Max |
13 Tooth Splined |
| Port Orientation - Cover End |
2520VQ |
| Mounting |
1 3/8 in |
| Major Diameter [Max |
Buna-N |
| Shaft Length |
2500 |
| Seal Material |
0.715 in |
| Port Orientation - Shaft End |
SAE B, 2 Bolt |
| Major Diameter [Min |
Single Shaft Seal |
| Rotation |
16/32 |
| Minor Diameter |
2700 |
| Pressure Port Size, Shaft End |
2500 |
| Cover End RPM [Max |
N/A |
| Displacement Shaft End (cu in/revolution) |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Mounting Flange |
0.873 in |
| Spline Description |
0.872 in |
| Controlled Flow Rate |
N/A |
| Max. RPM [Max |
N/A |
| Shaft End RPM [Max |
N/A |
| Shaft Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Model No. |
2520VQ21A8-11AA20 |
| Shaft End Pressure [Max |
3000 |
| Shaft Dia. |
3000 |
| Port Type |
12 |
| Relief Valve Setting |
31.5 |
| Pilot Type |
w/o Integral Valves |
| Pressure Port Size, Cover End |
Outlet 135° CCW from Inlet |
| Weight |
Outlet Opposite Inlet |
| Minor Diameter [Max |
3/4 in Flange |
| Pump Series |
1 in Flange |
| Shaft End Flow @ RPM |
1.67 |
| Integral Valve Configuration |
4.12 |