Hydraulic Excavator Gear Oil Pump 6204-51-1100 for Engine 4D95
| Spline Description: |
75.0 LB |
| Relief Valve Setting: |
Flange Mount |
| Mounting: |
Left Hand (CCW) |
| Minor Diameter [Min: |
3520VQ35A5-1CC20-LH |
| Shaft End Pressure [Max: |
3 |
| Integral Valve Configuration: |
Flange |
| Shaft Length: |
5/16 in |
| Shaft End RPM [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Spline Description |
75.0 LB |
| Relief Valve Setting |
Flange Mount |
| Mounting |
Left Hand (CCW) |
| Minor Diameter [Min |
3520VQ35A5-1CC20-LH |
| Shaft End Pressure [Max |
3 |
| Integral Valve Configuration |
Flange |
| Shaft Length |
5/16 in |
| Shaft End RPM [Max |
Standard Pilot |
| GPM @ 1,800 rpm, Cover End |
1.25 in |
| Port Size |
Straight w/ Key |
| Minor Diameter [Max |
3520VQ |
| Model No. |
2.5 in |
| Cover End Pressure [Max |
Buna-N |
| Displacement Cover End (cu in/revolution) |
2400 |
| Weight |
N/A |
| Cover End RPM [Max |
SAE C, 2 Bolt |
| Max. RPM [Max |
Single Shaft Seal |
| Pilot Type |
N/A |
| Controlled Flow Rate |
2500 |
| Major Diameter [Max |
2400 |
| Cover End Flow @ RPM |
N/A |
| Port Orientation - Cover End |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Type |
N/A |
| Manufacturer Part No. |
N/A |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Mounting Flange |
N/A |
| Minor Diameter |
N/A |
| Seal Material |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Pump Series |
3520VQ35A5-1CC20-LH |
| Major Diameter [Min |
3000 |
| Shaft Seal Type |
3000 |
| Pressure Port Size, Shaft End |
7.5 |
| Port Orientation - Shaft End |
52.5 |
| Rotation |
w/o Integral Valves |
| Shaft Key |
Outlet 45° CW from Inlet |
| Shaft Dia. |
Outlet Inline w/Inlet |
| GPM @ 1,800 rpm, Shaft End |
3/4 in Flange |
| Shaft Type |
1 1/4 in Flange |
| Pressure Port Size, Cover End |
1.1 |
| Shaft End Flow @ RPM |
6.88 |