Rexroth Hydromatik A4VG71 Hydraulic Pump Part Cylinder Block /Valve Plate/Piston
| Pressure Port Size, Shaft End: |
30.0 LB |
| Port Type: |
Flange Mount |
| Mounting Flange: |
Right Hand (CW) |
| Shaft End RPM [Max: |
V2010-1F12S2S-11BB12 |
| Shaft Type: |
1 1/2 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Minor Diameter [Min: |
N/A |
| Major Diameter [Max: |
N/A |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End |
30.0 LB |
| Port Type |
Flange Mount |
| Mounting Flange |
Right Hand (CW) |
| Shaft End RPM [Max |
V2010-1F12S2S-11BB12 |
| Shaft Type |
1 1/2 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Minor Diameter [Min |
N/A |
| Major Diameter [Max |
N/A |
| Seal Material |
0.875 in |
| Shaft Seal Type |
13 Tooth Splined |
| Weight |
V2010 |
| Pressure Port Size, Cover End |
1 5/16 in |
| Shaft End Pressure [Max |
Buna-N |
| Integral Valve Configuration |
2400 |
| Port Size |
0.728 in |
| Pump Series |
SAE B, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Pilot Type |
16/32 |
| Spline Description |
3000 |
| Minor Diameter |
2400 |
| Port Orientation - Shaft End |
N/A |
| Minor Diameter [Max |
2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Shaft Key |
0.873 in |
| Cover End RPM [Max |
0.872 in |
| Major Diameter [Min |
0.7335 in |
| GPM @ 1,800 rpm, Shaft End |
0.7225 in |
| Relief Valve Setting |
N/A |
| Cover End Flow @ RPM |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Model No. |
V2010-1F12S2S-11BB12 |
| Controlled Flow Rate |
2500 |
| Shaft Length |
2200 |
| Manufacturer Part No. |
3 |
| GPM @ 1,800 rpm, Cover End |
18 |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Cover End Pressure [Max |
Outlet 45° CCW from Inlet |
| Rotation |
Outlet 90° CCW from Inlet |
| Port Orientation - Cover End |
1/2 in SAE O-Ring |
| Shaft End Flow @ RPM |
3/4 in SAE O-Ring |
| Max. RPM [Max |
0.4 |
| Shaft Dia. |
2.38 |