Cold Planer Lubrication System Engine Oil Pump Group 6N1030 0R4999
| Displacement Shaft End (cu in/revolution): |
101.0 LB |
| Minor Diameter [Max: |
Flange Mount |
| Shaft End Flow @ RPM: |
Left Hand (CCW) |
| Controlled Flow Rate: |
4525VQ42A21-11AA20-LH |
| Pressure Port Size, Cover End: |
3 1/2 |
| Seal Material: |
Flange |
| Shaft Type: |
N/A |
| Spline Description: |
Standard Pilot |
| PDF |
|
Product Details
| Displacement Shaft End (cu in/revolution) |
101.0 LB |
| Minor Diameter [Max |
Flange Mount |
| Shaft End Flow @ RPM |
Left Hand (CCW) |
| Controlled Flow Rate |
4525VQ42A21-11AA20-LH |
| Pressure Port Size, Cover End |
3 1/2 |
| Seal Material |
Flange |
| Shaft Type |
N/A |
| Spline Description |
Standard Pilot |
| Port Orientation - Cover End |
1.25 in |
| Major Diameter [Max |
14 Tooth Splined |
| Port Type |
4525VQ |
| Manufacturer Part No. |
1.9375 in |
| Cover End Pressure [Max |
Buna-N |
| Rotation |
2200 |
| Cover End RPM [Max |
1.04 in |
| Shaft End Pressure [Max |
SAE C, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Shaft Key |
12/24 |
| Shaft End RPM [Max |
2200 |
| Minor Diameter [Min |
2200 |
| Cover End Flow @ RPM |
N/A |
| Pilot Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Length |
1.248 in |
| Major Diameter [Min |
1.247 in |
| Mounting Flange |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Max. RPM [Max |
N/A |
| Weight |
42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
4525VQ42A21-11AA20-LH |
| Integral Valve Configuration |
3000 |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Pump Series |
31.5 |
| Mounting |
63 |
| Shaft Seal Type |
w/o Integral Valves |
| Port Orientation - Shaft End |
Outlet 135° CCW from Inlet |
| Model No. |
Outlet Opposite Inlet |
| Relief Valve Setting |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/2 in Flange |
| Shaft Dia. |
4.12 |
| Minor Diameter |
8.46 |