Automotive Car Hino water pump 16100-E4290 for Engine J08E
| Controlled Flow Rate: |
3/8 in |
| Pilot Type: |
N/A |
| Displacement Cover End (cu in/revolution): |
Piston Pumps |
| Shaft Dia.: |
PVH |
| Shaft Key: |
70.0 LB |
| Displacement Shaft End (cu in/revolution): |
Right Hand (CW) |
| Max. RPM [Max: |
Flange |
| Mounting Flange: |
Variable Displacement Open Circuit |
| PDF |
|
Product Details
| Controlled Flow Rate |
3/8 in |
| Pilot Type |
N/A |
| Displacement Cover End (cu in/revolution) |
Piston Pumps |
| Shaft Dia. |
PVH |
| Shaft Key |
70.0 LB |
| Displacement Shaft End (cu in/revolution) |
Right Hand (CW) |
| Max. RPM [Max |
Flange |
| Mounting Flange |
Variable Displacement Open Circuit |
| Weight |
#10 SAE O-Ring Port - Bottom (Top Plugged) |
| Shaft Seal Type |
2 1/2 in 4-Bolt Flange/Code 61 |
| Shaft Type |
1.5 in |
| Manufacturer Part No. |
Straight w/ Key |
| Minor Diameter [Max |
59 gpm @ 1800 rpm |
| Port Orientation - Shaft End |
1 1/4 in 4-Bolt Flange/Code 62 |
| Pump Series |
Pressure And Flow Compensator |
| Pressure Port Size, Cover End |
2.12 in |
| Model No. |
Side Port |
| Minor Diameter [Min |
Viton |
| Port Orientation - Cover End |
None |
| Pressure Port Size, Shaft End |
59 |
| Cover End Flow @ RPM |
SAE C, 4 Bolt |
| Major Diameter [Min |
No Case to Inlet Check |
| Integral Valve Configuration |
1 1/2 w/3/8 Key |
| GPM @ 1,800 rpm, Cover End |
No Auxiliary Mounting Features |
| Shaft End Flow @ RPM |
8 |
| Minor Diameter |
None |
| Mounting |
3625 |
| Shaft Length |
3,568-3,684 psi |
| Relief Valve Setting |
Standard Displacement |