2.953 Inch | 75 Millimeter x 7.48 Inch | 190 Millimeter x 1.772 Inch | 45 Millimeter SKF 7415PJDU Angular Contact Ball Bearings
Online shopping 45MM Bore; 100MM Out Long Description 2.953 Inch | 75 Millimeter x 7.48 Inch | 190 Millimeter x 1.772 Inch | 45 Millimeter SKF 7415PJDU Angular Contact Ball Bearings from a great BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. selection at 2.953 Inch | 75 Millimeter x 7.48 Inch | 190 Millimeter x 1.772 Inch | 45 Millimeter Store. ... SKF Bearing Accessories.
What is 7415PJDU bearing cross reference?
Brand Name: |
SKF |
Model Number: |
7415PJDU |
Pressure Port Size, Shaft End: |
45.0 LB |
Minor Diameter: |
Flange Mount |
Minor Diameter [Max: |
Left Hand (CCW) |
Rotation: |
2520VQ21A11-1DD20LH |
Cover End Flow @ RPM: |
2 1/2 |
Port Type: |
Flange |
Displacement Shaft End (cu in/revolution): |
3/16 in |
Pump Series: |
Standard Pilot |
Product Details
Pressure Port Size, Shaft End |
45.0 LB |
Minor Diameter |
Flange Mount |
Minor Diameter [Max |
Left Hand (CCW) |
Rotation |
2520VQ21A11-1DD20LH |
Cover End Flow @ RPM |
2 1/2 |
Port Type |
Flange |
Displacement Shaft End (cu in/revolution) |
3/16 in |
Pump Series |
Standard Pilot |
Manufacturer Part No. |
0.875 in |
Pilot Type |
Straight w/ Key |
GPM @ 1,800 rpm, Cover End |
2520VQ |
Weight |
1 15/16 in |
GPM @ 1,800 rpm, Shaft End |
Buna-N |
Pressure Port Size, Cover End |
2500 |
Shaft End Flow @ RPM |
N/A |
Shaft End Pressure [Max |
SAE B, 2 Bolt |
Relief Valve Setting |
Single Shaft Seal |
Controlled Flow Rate |
N/A |
Integral Valve Configuration |
2700 |
Mounting |
2500 |
Shaft End RPM [Max |
N/A |
Model No. |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Mounting Flange |
N/A |
Max. RPM [Max |
N/A |
Port Orientation - Shaft End |
N/A |
Minor Diameter [Min |
N/A |
Spline Description |
N/A |
Cover End Pressure [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Major Diameter [Max |
2520VQ21A11-1DD20LH |
Displacement Cover End (cu in/revolution) |
3000 |
Shaft Length |
3000 |
Shaft Key |
16.5 |
Cover End RPM [Max |
31.5 |
Shaft Seal Type |
w/o Integral Valves |
Shaft Type |
Outlet 135° CW from Inlet |
Shaft Dia. |
Outlet 90° CW from Inlet |
Port Size |
3/4 in Flange |
Seal Material |
1 in Flange |
Major Diameter [Min |
2.22 |
Port Orientation - Cover End |
4.12 |