1.772 Inch | 45 Millimeter x 2.953 Inch | 75 Millimeter x 2.52 Inch | 64 Millimeter TIMKEN 2MMC9109WI QUL Precision Ball Bearings
1.772 Inch | 45 Millimeter x 2.953 Inch | 75 Millimeter x 2.52 Inch | 64 Millimeter TIMKEN 2MMC9109WI QUL Precision Ball Bearings Product BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. 2000 RPM maximum rpm: Brochures 1.772 Inch | 45 Millimeter x 2.953 Inch | 75 Millimeter x 2.52 Inch | 64 Millimeter , TIMKEN Bearing Manufacturing Service . Get Your Free.
What is 2MMC9109WI QUL bearing interchange？
| Brand Name: |
TIMKEN |
| Model Number: |
2MMC9109WI QUL |
| Port Orientation - Shaft End: |
45.0 LB |
| Shaft Type: |
Flange Mount |
| Pilot Type: |
Right Hand (CW) |
| Major Diameter [Max: |
2520VQ12A8-1AA20 |
| Cover End Flow @ RPM: |
2.5 |
| Manufacturer Part No.: |
Flange |
| Seal Material: |
3/16 in |
| Cover End RPM [Max: |
Standard Pilot |
Product Details
| Port Orientation - Shaft End |
45.0 LB |
| Shaft Type |
Flange Mount |
| Pilot Type |
Right Hand (CW) |
| Major Diameter [Max |
2520VQ12A8-1AA20 |
| Cover End Flow @ RPM |
2.5 |
| Manufacturer Part No. |
Flange |
| Seal Material |
3/16 in |
| Cover End RPM [Max |
Standard Pilot |
| Pressure Port Size, Cover End |
0.875 in |
| Mounting Flange |
Straight w/ Key |
| Max. RPM [Max |
2520VQ |
| Minor Diameter [Min |
1.9375 in |
| Weight |
Double |
| Minor Diameter [Max |
Buna-N |
| Controlled Flow Rate |
2700 |
| Minor Diameter |
N/A |
| Cover End Pressure [Max |
SAE B, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Spline Description |
N/A |
| Shaft Seal Type |
2700 |
| Port Type |
2700 |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Displacement Cover End (cu in/revolution) |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Pump Series |
N/A |
| Shaft End Pressure [Max |
N/A |
| Model No. |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Relief Valve Setting |
N/A |
| GPM @ 1,800 rpm, Shaft End |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Key |
2520VQ12A8-1AA20 |
| Shaft End RPM [Max |
3000 |
| Major Diameter [Min |
3000 |
| Shaft Dia. |
12 |
| Shaft End Flow @ RPM |
18 |
| Displacement Shaft End (cu in/revolution) |
2.5 |
| Rotation |
Outlet 135° CCW from Inlet |
| Integral Valve Configuration |
Outlet Opposite Inlet |
| Port Size |
3/4 in Flange |
| Port Orientation - Cover End |
1 in Flange |
| Shaft Length |
1.7 |