1.969 Inch | 50 Millimeter x 3.15 Inch | 80 Millimeter x 0.63 Inch | 16 Millimeter TIMKEN 2MMV9110HX SUL Precision Ball Bearings
What BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. is B-1616, BH-1614, BH- compatible bearing: the 1.969 Inch | 50 Millimeter x 3.15 Inch | 80 Millimeter x 0.63 Inch | 16 Millimeter best place to buy 1.969 Inch | 50 Millimeter x 3.15 Inch | 80 Millimeter x 0.63 Inch | 16 Millimeter TIMKEN 2MMV9110HX SUL Precision Ball Bearings online? TIMKEN Bearing Manufacturing 1.0000 in D Service .
What is 2MMV9110HX SUL bearing interchange？
| Brand Name: |
TIMKEN |
| Model Number: |
2MMV9110HX SUL |
| Integral Valve Configuration: |
76.0 LB |
| Shaft Length: |
Flange Mount |
| Weight: |
Right Hand (CW) |
| Minor Diameter [Min: |
3525VQ25A21-11DD20 |
| Minor Diameter: |
3 |
| Major Diameter [Min: |
Flange |
| Seal Material: |
N/A |
| Pressure Port Size, Cover End: |
Standard Pilot |
Product Details
| Integral Valve Configuration |
76.0 LB |
| Shaft Length |
Flange Mount |
| Weight |
Right Hand (CW) |
| Minor Diameter [Min |
3525VQ25A21-11DD20 |
| Minor Diameter |
3 |
| Major Diameter [Min |
Flange |
| Seal Material |
N/A |
| Pressure Port Size, Cover End |
Standard Pilot |
| Displacement Shaft End (cu in/revolution) |
1.25 in |
| Rotation |
14 Tooth Splined |
| Cover End Flow @ RPM |
3525VQ |
| Max. RPM [Max |
1 15/16 in |
| Major Diameter [Max |
Buna-N |
| Shaft Type |
2500 |
| Port Orientation - Cover End |
1.04 in |
| Pressure Port Size, Shaft End |
SAE C, 2 Bolt |
| Relief Valve Setting |
Single Shaft Seal |
| Pilot Type |
12/24 |
| Model No. |
2500 |
| Minor Diameter [Max |
2500 |
| Shaft End Flow @ RPM |
N/A |
| Cover End RPM [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Size |
1.248 in |
| Port Orientation - Shaft End |
1.247 in |
| Mounting Flange |
N/A |
| Shaft Dia. |
N/A |
| Controlled Flow Rate |
N/A |
| Shaft End RPM [Max |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Pump Series |
3525VQ25A21-11DD20 |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Shaft End Pressure [Max |
3000 |
| Cover End Pressure [Max |
31.5 |
| GPM @ 1,800 rpm, Cover End |
37.5 |
| Displacement Cover End (cu in/revolution) |
w/o Integral Valves |
| Mounting |
Outlet 135° CW from Inlet |
| Shaft Key |
Outlet 90° CW from Inlet |
| Spline Description |
1 in Flange |
| Shaft Seal Type |
1 1/4 in Flange |
| Manufacturer Part No. |
4.12 |
| Port Type |
4.98 |