2.559 Inch | 65 Millimeter x 2.362 Inch | 60 Millimeter x 3.15 Inch | 80 Millimeter TIMKEN LSM65BRHSAFQAATL Pillow Block Bearings
100% Authentic. 2.559 Inch | 65 Millimeter x 2.362 Inch | 60 Millimeter x 3.15 Inch | 80 Millimeter TIMKEN LSM65BRHSAFQAATL Pillow Block Bearings 1430 kgf dynamic load capacity: Highest 2.559 Inch | 65 Millimeter x 2.362 Inch | 60 Millimeter x 3.15 Inch | 80 Millimeter Quality. Certified BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. Supplier.
What is LSM65BRHSAFQAATL bearing cross reference？
| Brand Name: |
TIMKEN |
| Model Number: |
LSM65BRHSAFQAATL |
| Shaft Seal Type: |
76.0 LB |
| Shaft Dia.: |
Flange Mount |
| Shaft Type: |
Right Hand (CW) |
| Mounting: |
3525VQ30A21-11BB20 |
| Rotation: |
3 |
| Minor Diameter: |
Flange |
| Pump Series: |
N/A |
| Model No.: |
Standard Pilot |
Product Details
| Shaft Seal Type |
76.0 LB |
| Shaft Dia. |
Flange Mount |
| Shaft Type |
Right Hand (CW) |
| Mounting |
3525VQ30A21-11BB20 |
| Rotation |
3 |
| Minor Diameter |
Flange |
| Pump Series |
N/A |
| Model No. |
Standard Pilot |
| Port Orientation - Cover End |
1.25 in |
| Port Size |
14 Tooth Splined |
| Controlled Flow Rate |
3525VQ |
| GPM @ 1,800 rpm, Shaft End |
1 15/16 in |
| Seal Material |
Buna-N |
| Cover End Pressure [Max |
2500 |
| Manufacturer Part No. |
1.04 in |
| Minor Diameter [Max |
SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Shaft End Flow @ RPM |
12/24 |
| Displacement Cover End (cu in/revolution) |
2500 |
| Shaft End Pressure [Max |
2500 |
| Shaft End RPM [Max |
N/A |
| Relief Valve Setting |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
1.248 in |
| Cover End RPM [Max |
1.247 in |
| Major Diameter [Max |
N/A |
| Port Type |
N/A |
| Shaft Length |
N/A |
| Cover End Flow @ RPM |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Spline Description |
3525VQ30A21-11BB20 |
| Pilot Type |
3000 |
| Integral Valve Configuration |
3000 |
| Pressure Port Size, Shaft End |
31.5 |
| Major Diameter [Min |
45 |
| Weight |
w/o Integral Valves |
| Shaft Key |
Outlet 45° CCW from Inlet |
| Mounting Flange |
Outlet 90° CCW from Inlet |
| Minor Diameter [Min |
1 in Flange |
| Max. RPM [Max |
1 1/4 in Flange |
| Port Orientation - Shaft End |
4.12 |
| Displacement Shaft End (cu in/revolution) |
5.96 |