| Shaft Seal Type | 101.0 LB |
| Manufacturer Part No. | Flange Mount |
| Shaft End Pressure [Max | Left Hand (CCW) |
| Shaft End Flow @ RPM | 4525VQ60A21-11AA20-LH |
| Pressure Port Size, Shaft End | 3 1/2 |
| Displacement Cover End (cu in/revolution) | Flange |
| Minor Diameter | N/A |
| Shaft Dia. | Standard Pilot |
| Pressure Port Size, Cover End | 1.25 in |
| Major Diameter [Max | 14 Tooth Splined |
| Spline Description | 4525VQ |
| Port Type | 1.9375 in |
| Shaft Type | Buna-N |
| Cover End Pressure [Max | 2200 |
| Integral Valve Configuration | 1.04 in |
| Seal Material | SAE C, 2 Bolt |
| Shaft End RPM [Max | Single Shaft Seal |
| Shaft Length | 12/24 |
| Model No. | 2200 |
| Cover End RPM [Max | 2200 |
| Pilot Type | N/A |
| Port Orientation - Shaft End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Min | 1.248 in |
| Weight | 1.247 in |
| Pump Series | N/A |
| Port Orientation - Cover End | N/A |
| Minor Diameter [Min | N/A |
| GPM @ 1,800 rpm, Shaft End | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Mounting | 4525VQ60A21-11AA20-LH |
| Cover End Flow @ RPM | 3000 |
| Port Size | 2500 |
| Displacement Shaft End (cu in/revolution) | 31.5 |
| Controlled Flow Rate | 90 |
| Rotation | w/o Integral Valves |
| GPM @ 1,800 rpm, Cover End | Outlet 135° CCW from Inlet |
| Minor Diameter [Max | Outlet Opposite Inlet |
| Shaft Key | 1 in Flange |
| Relief Valve Setting | 1 1/2 in Flange |
| Mounting Flange | 4.12 |
| Max. RPM [Max | 11.8 |
