DODGE EF4B-IP-108LE Flange Block Bearings
DODGE Bearing are a few brands 8.3 mm b you will find BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. in our inventory. Find DODGE EF4B-IP-108LE Flange Block Bearings to see what's in stock!
What is EF4B-IP-108LE bearing cross reference?
Brand Name: | DODGE |
Model Number: | EF4B-IP-108LE |
Shaft Seal Type: | 118.0 LB |
Displacement Cover End (cu in/revolution): | Flange Mount |
Major Diameter [Max: | Left Hand (CCW) |
Spline Description: | 4535VQ60A38-11AA20-LH |
Weight: | 4 |
Pressure Port Size, Shaft End: | Flange |
Mounting Flange: | N/A |
GPM @ 1,800 rpm, Cover End: | Standard Pilot |
Product Details
Shaft Seal Type | 118.0 LB |
Displacement Cover End (cu in/revolution) | Flange Mount |
Major Diameter [Max | Left Hand (CCW) |
Spline Description | 4535VQ60A38-11AA20-LH |
Weight | 4 |
Pressure Port Size, Shaft End | Flange |
Mounting Flange | N/A |
GPM @ 1,800 rpm, Cover End | Standard Pilot |
Cover End Flow @ RPM | 1.25 in |
Minor Diameter [Min | 14 Tooth Splined |
Pressure Port Size, Cover End | 4535VQ |
Minor Diameter | 1 15/16 in |
Manufacturer Part No. | Double |
Controlled Flow Rate | Buna-N |
Relief Valve Setting | 2200 |
Port Size | 1.04 in |
Port Orientation - Cover End | SAE C, 2 Bolt |
Shaft Type | Single Shaft Seal |
Seal Material | 12/24 |
Integral Valve Configuration | 2200 |
Shaft Length | 2200 |
Shaft Dia. | N/A |
Major Diameter [Min | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Shaft End Pressure [Max | 1.248 in |
Max. RPM [Max | 1.247 in |
Model No. | N/A |
Minor Diameter [Max | N/A |
Displacement Shaft End (cu in/revolution) | 11.8 |
Cover End Pressure [Max | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
Rotation | 4535VQ60A38-11AA20-LH |
Port Type | 3000 |
Cover End RPM [Max | 2500 |
Shaft Key | 57 |
Shaft End RPM [Max | 90 |
GPM @ 1,800 rpm, Shaft End | w/o Integral Valves |
Pilot Type | Outlet Opposite Inlet |
Shaft End Flow @ RPM | Outlet Opposite Inlet |
Mounting | 1 1/4 in Flange |
Pump Series | 1 1/2 in Flange |
Port Orientation - Shaft End | 7.4 |