DODGE TPHU-S2-300R Take Up Unit Bearings
We work closely 45 mm Da max. with our DODGE TPHU-S2-300R Take Up Unit Bearings manufacturing 0.87 Calculation factor (single, tandem) Y2 partners to bring the best value 32 mm db min. to BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. customers.
What is TPHU-S2-300R bearing cross reference?
Brand Name: | DODGE |
Model Number: | TPHU-S2-300R |
Shaft Dia.: | 76.0 LB |
Displacement Cover End (cu in/revolution): | Flange Mount |
Major Diameter [Max: | Left Hand (CCW) |
Port Size: | 3525VQ25A21-11DD20-LH |
Shaft Type: | 3 |
Port Orientation - Shaft End: | Flange |
Shaft End Flow @ RPM: | N/A |
Cover End RPM [Max: | Standard Pilot |
Product Details
Shaft Dia. | 76.0 LB |
Displacement Cover End (cu in/revolution) | Flange Mount |
Major Diameter [Max | Left Hand (CCW) |
Port Size | 3525VQ25A21-11DD20-LH |
Shaft Type | 3 |
Port Orientation - Shaft End | Flange |
Shaft End Flow @ RPM | N/A |
Cover End RPM [Max | Standard Pilot |
Shaft Key | 1.25 in |
Shaft End RPM [Max | 14 Tooth Splined |
Shaft Seal Type | 3525VQ |
GPM @ 1,800 rpm, Shaft End | 1.9375 in |
Weight | Buna-N |
Cover End Pressure [Max | 2500 |
Max. RPM [Max | 1.04 in |
Mounting | SAE C, 2 Bolt |
Shaft Length | Single Shaft Seal |
Minor Diameter [Min | 12/24 |
Integral Valve Configuration | 2500 |
Cover End Flow @ RPM | 2500 |
Pump Series | N/A |
Port Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Minor Diameter [Max | 1.248 in |
Pressure Port Size, Shaft End | 1.247 in |
Shaft End Pressure [Max | N/A |
Seal Material | N/A |
Pressure Port Size, Cover End | N/A |
Minor Diameter | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Pilot Type | 3525VQ25A21-11DD20-LH |
Manufacturer Part No. | 3000 |
Major Diameter [Min | 3000 |
GPM @ 1,800 rpm, Cover End | 31.5 |
Spline Description | 37.5 |
Model No. | w/o Integral Valves |
Controlled Flow Rate | Outlet 135° CW from Inlet |
Rotation | Outlet 90° CW from Inlet |
Port Orientation - Cover End | 1 in Flange |
Relief Valve Setting | 1 1/4 in Flange |
Mounting Flange | 4.12 |
Displacement Shaft End (cu in/revolution) | 4.98 |