2.938 Inch | 74.625 Millimeter x 0 Inch | 0 Millimeter x 3.75 Inch | 95.25 Millimeter LINK BELT PLB6847D8C Pillow Block Bearings
How do Triple seals Seal I place an BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. 12800 Basic Load Rating, Dynamic Rating(N) EMERGENCY order for 2.938 Inch | 74.625 Millimeter x 0 Inch | 0 Millimeter x 3.75 Inch | 95.25 Millimeter a 2.938 Inch | 74.625 Millimeter x 0 Inch | 0 Millimeter x 3.75 Inch | 95.25 Millimeter LINK BELT PLB6847D8C Pillow Block Bearings that I want to pick up at a our store?
What is PLB6847D8C bearing cross reference?
Brand Name: | LINK BELT |
Model Number: | PLB6847D8C |
Manufacturer Part No.: | 45.0 LB |
Minor Diameter [Min: | Flange Mount |
Shaft Seal Type: | Left Hand (CCW) |
Displacement Shaft End (cu in/revolution): | 2.8 |
Pump Series: | 2.5 |
Pilot Type: | Flange |
Major Diameter [Min: | N/A |
Pressure Port Size, Cover End: | Standard Pilot |
Product Details
Manufacturer Part No. | 45.0 LB |
Minor Diameter [Min | Flange Mount |
Shaft Seal Type | Left Hand (CCW) |
Displacement Shaft End (cu in/revolution) | 2.8 |
Pump Series | 2.5 |
Pilot Type | Flange |
Major Diameter [Min | N/A |
Pressure Port Size, Cover End | Standard Pilot |
Port Type | 0.875 in |
Max. RPM [Max | 13 Tooth Splined |
Model No. | 2520VQ |
Shaft Key | 1 3/8 in |
Minor Diameter | Double |
Shaft End RPM [Max | Buna-N |
Mounting Flange | 2700 |
Spline Description | 0.715 in |
Minor Diameter [Max | SAE B, 2 Bolt |
Pressure Port Size, Shaft End | Single Shaft Seal |
GPM @ 1,800 rpm, Cover End | 16/32 |
Shaft End Flow @ RPM | 2700 |
Weight | 2700 |
Cover End Pressure [Max | N/A |
GPM @ 1,800 rpm, Shaft End | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Relief Valve Setting | 0.873 in |
Shaft Type | 0.872 in |
Port Size | N/A |
Rotation | N/A |
Shaft Length | N/A |
Port Orientation - Cover End | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Cover End RPM [Max | 2520VQ14E14-11CC20-LH |
Major Diameter [Max | 2000 |
Controlled Flow Rate | 3000 |
Seal Material | 21 |
Mounting | 21 |
Cover End Flow @ RPM | w/o Integral Valves |
Shaft Dia. | Outlet 45° CW from Inlet |
Displacement Cover End (cu in/revolution) | Outlet Inline w/Inlet |
Port Orientation - Shaft End | 1 1/16 in SAE O-Ring |
Shaft End Pressure [Max | 1 in Flange |
Integral Valve Configuration | 2.8 |