NTN 6904LLBCS24V20 Single Row Ball Bearings
With over 10170 full-service BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. stores, our NTN 6904LLBCS24V20 Single Row Ball Bearings inventory is extensive and our parts are priced right. within 24 120.0000 mm D hours. This 6000 rpm Oil Speed Rating n2 helps 63700 N Basic Dynamic Radial Load Rating C you maximize your productivity by saving time and your hard-earned dollars.
What is 6904LLBCS24V20 bearing cross reference?
Brand Name: | NTN |
Model Number: | 6904LLBCS24V20 |
Cover End Flow @ RPM: | 30.0 LB |
Spline Description: | Flange Mount |
Shaft Length: | Right Hand (CW) |
Pressure Port Size, Cover End: | V2010-1F7S5S-11AA12 |
Pressure Port Size, Shaft End: | 1 1/2 |
Pilot Type: | Flange |
Integral Valve Configuration: | N/A |
Port Size: | N/A |
Product Details
Cover End Flow @ RPM | 30.0 LB |
Spline Description | Flange Mount |
Shaft Length | Right Hand (CW) |
Pressure Port Size, Cover End | V2010-1F7S5S-11AA12 |
Pressure Port Size, Shaft End | 1 1/2 |
Pilot Type | Flange |
Integral Valve Configuration | N/A |
Port Size | N/A |
Pump Series | 0.875 in |
Port Orientation - Shaft End | 13 Tooth Splined |
GPM @ 1,800 rpm, Shaft End | V2010 |
Shaft End Pressure [Max | 1 5/16 in |
Seal Material | Buna-N |
Displacement Shaft End (cu in/revolution) | 3000 |
Max. RPM [Max | 0.728 in |
Controlled Flow Rate | SAE B, 2 Bolt |
Shaft Type | Single Shaft Seal |
Relief Valve Setting | 16/32 |
Shaft End RPM [Max | 3000 |
Minor Diameter [Min | 3000 |
Mounting | N/A |
Model No. | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Shaft Seal Type | 0.873 in |
GPM @ 1,800 rpm, Cover End | 0.872 in |
Port Type | 0.7335 in |
Minor Diameter | 0.7225 in |
Shaft End Flow @ RPM | N/A |
Cover End RPM [Max | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
Shaft Key | V2010-1F7S5S-11AA12 |
Mounting Flange | 2500 |
Rotation | 2500 |
Cover End Pressure [Max | 7.5 |
Weight | 10.5 |
Port Orientation - Cover End | N/A |
Shaft Dia. | Outlet 135° CCW from Inlet |
Minor Diameter [Max | Outlet Opposite Inlet |
Major Diameter [Min | 1/2 in SAE O-Ring |
Major Diameter [Max | 3/4 in SAE O-Ring |
Manufacturer Part No. | 1 |
Displacement Cover End (cu in/revolution) | 1.39 |